Dual 1/64 Gran Turismo 25th Anniversary Theme Display
Dual 1/64 Gran Turismo 25th Anniversary Theme Display
3D
Published 2022-04-20T16:23:04+00:00
A Gran Turismo theme display base for 1/64 scale cars.
The cars I used in the photos are Mini GT Bugatti VGT and TLVN Nissan VGT.
If you wish to have a display base tweaked to fit to a different car from a different brand, please send me these dimension for the display base holes: https://imgur.com/5T6mb2L
The display base is separated into 3 parts for easy printing and colour swap. The parts are:
1) Base (BaseV1.STL)
2) Base back wall (BoxBackAssem.STL)
3) Flat Base (FlatBase.STL)
*Optional:
1) G_Patch_1-Blue.STL
2) G_Patch_2-Blue.STL
3) T_Patch-Red.STL
Print Settings
Nozzle size = 0.3 mm (Should be printable with 0.4)
Layer height = 0.2 mm
Filament change layer for colours on "BoxBackAssem.STL":
1) Start (Overall background colour, mine is in white)
2) Layer 9 (All lettering colours except "25", mine is in black)
3) Layer 14 ("5" colour, mine is in red)
4) Layer 19 ("2" colour, mine is in blue)
Filament change layer for colours on "FlatBase.STL":
1) Start (GT logo and "Vision Gran Turismo" lettering, mine is in black)
2) Layer 4 (Overall flat base colour, mine is in white)
Optional
The following parts are optional:
1) G_Patch_1-Blue.STL
2) G_Patch_2-Blue.STL
3) T_Patch-Red.STL
"G_Patch_1-Blue" and "G_Patch_2-Blue" are pieces that fit into the "G" in the flat base, I printed mine in blue to fit the original GT logo.
"T_Patch-Red.STL" are the piece that fit into the "T" in the flat base, I printed mine in red to fit the original GT logo.
The flat base will still work without those 3 parts but the cars might not be sitting on a flat surface.
Assembly
The car is tied by wires through the hole in the base
Flat base and back wall should fit nicely into the base, it is recommended to use some glue or double sided tape for the flat base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
Custom display base are also available at $5! Contact me to discuss what you want!
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
| Date de publication | 20/04/2022 |