Dual 1/64 Need for Speed 2 SE Display
Dual 1/64 Need for Speed 2 SE Display
3D
Published 2022-07-25T09:16:18+00:00
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068
Or my Telegram channel: https://t.me/+pux0lNikT3E2N2Q9
Custom display base are also available at $5! Contact me to discuss what you want!
Description
A display made based on Need for Speed 2 SE, background art is based on the main menu pattern in game. The size of this display will fit nicely into a Funko Pop protector box too.
The cars I used in the photos are:
Mclaren F1 (Kyosho)
Ferrari F355 (Kyosho)
If you wish to have a display base tweaked to fit to a different car from a different brand, please send me these dimension for the display base holes: https://imgur.com/5T6mb2L
The display base is separated into many parts for easy printing and colour swap. The base parts are:
1) Base (Base_Slanted.STL)
2) Flat Base (FlatBase_Slanted.STL)
3) Back Wall (BoxBackAssem.STL)
*4) EA Logo (ea_LOGO.STL)
*Optional
Print Settings
Nozzle size = 0.3 mm (Should be printable with 0.4)
Layer height = 0.2 mm
Filament change layer for colours on "FlatBase":
1) Start (Lines colour, mine is in black)
2) Layer 6 (Overall flat base colour, mine is in gold)
Filament change layer for colours on "BoxBackAssem":
1) Start (Overall back wall colour, mine is in gold)
2) Layer 9 (Lines colour, mine is in black)
3) Layer 14 (NFS2 SE logo, mine is in grey)
Filament change layer for colours on "BoxBackAssem":
1) Start (Overall base colour, mine is in gold)
2) Layer 6 ("ELECTRONIC ARTS" lettering colour, mine is in grey)
Assembly
The flat base should fit into the base nicely, recommeded to use some glue or tape to secure it. Back wall should slide into the gap and dont need additional glue or tape to secure it.
The Ferrari F355 I used is tied by wire and the Mclaren F1 is secure with a single hold screw. If you wish to have the secure holes change, send me a message here or any social sites I listed below.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
Facebook: https://www.facebook.com/groups/1115757609295068/
| Date de publication | 25/07/2022 |