Egg Rotary Dispenser MK3
$9.70 Egg Rotary Dispenser MK3
3D
Published 2022-11-04T10:18:20+00:00
A 3D printable robust, durable and efficient Taller Egg Rotary Dispenser that is easy to print without any support on a larger 3D Printer with a minimum build volume of 180 mm X 180 mm X 300 mm (~ 7” X 7” X 12“).
The dispenser is used to sore and dispense fresh eggs on a counter top, shelf or table at room temperature. It may be difficult to use this dispenser in a refrigerator to dispense store-bought eggs, unless there is at least 375 mm (15”) spacing between the shelves.
The part can be easily 3D printed, without any support, on a modern inexpensive 3D Printer with a Z axis of at lest 300 mm (12”), such as the Artillery Sidewinder X1, the Creality CR-10, the FLSUN QQ Delta and other similar 3D printers with taller Z axis. It can be printed with a variety of materials, including PLA, PETG, ABS, ASA and many other types of printable materials.
PETG works very well for this application. It is easy to print. The object should be durable, easy to maintain, and last for a long time.
PLA should work as well as long as the parts will not be used, stored or kept at in a high temperature environment, exceeding ~55 C (~ 130 F).
- The pictures of the dispenser on the counter with the fresh eggs are courtesy of my neighbor Ben, who has been kind enough to supply us with delicious fresh eggs from his free ranging chickens.
Recommended print settings with a .4 mm nozzle (FLSUN QQ)
- Layer Height: .15 ~ 1.6 mm depending on printer
- 3 perimeters or shells (1.35 ~ 1.5 mm)
- 8 bottom layers (1.2~ 1.28 mm)
- 8 top layers (1.2 ~ 1.28 mm)
- Infill 5%~10%, depending on infill type
- Just enough infill to stabilize the walls of the object
- 5% Gyroid worked well for me
Object size: 175 mm X 175 mm X 300 mm
Material used: 653 grams
Print time: 2 days, 18 hours, 13 minutes (3973 minutes)
Recommended print settings with a .6 mm nozzle (Artillery Sidewinder X1)
- Layer Height: .15 ~ 1.6 mm depending on printer
- 2 perimeters or shells (1.34 ~ 1.5 mm)
- 8 bottom layers (1.2~ 1.28 mm)
- 8 top layers (1.2 ~ 1.28 mm)
- Infill 5%~10%, depending on infill type
- Just enough infill to stabilize the walls of the object.
- 5% Gyroid worked well for me
Object size: 175 mm X 175 mm X 300 mm
Material used: 711 grams
Print time: 1 day, 21 hour, 33 minutes (2733 minutes)
| Date de publication | 04/11/2022 |
| Price | $9.70 |
| Durée d’impression | 2700 - 2701 minutes |
| Quantité de filament | 700 grams |
| Dimensions | 175mm X 175mm X 300mm |
| Technologie | FDM |
| Sans support | YES |