Egyptian Wall and Tower Set
$10.00 Egyptian Wall and Tower Set
3D
Published 2021-10-18T08:20:18+00:00
**Disclaimers**
- All non terrain models in pictures are of Games Workshops Intellectual Property.
- This is my first full design set.
- All prints have only been done on a filament printer, at this point in time I have no info on how well it will print with resin.
See the design process and story here:https://www.myminifactory.com/stories/my-first-release-finally-done-616de7fd8807e
Thank you for looking at my first design set! This modular terrain will help you play out your tabletop games with an Egyptian feel. The goal was to have a design that would be reminiscent of how some Egyptian buildings would look in a non ruined state closer to the time they were built. I went with simplicity as much as I could, and I hope you enjoy it in your siege battles and other campaigns like I will.
All terrain is painted as follows:
- Base coat white spraypaint
- Base layer Citadel Screaming skull
- Light wash with Citadel Agrax Earthshade
- Dry brush with Citadel Eldar Flesh
I look forward to pictures and feedback if you decide to buy this product!
All prints were with the following specs unless otherwise noted:
Printed on Creality Ender 3 Pro
All models should be rotated correctly to how I printed them. Almost all are support free, a few are pre supported.
Sliced in Cura with following settings (can use the standard setting for .2mm layer height, and adjust the specific settings below):
- .4 mm nozzle
- .2 mm layer height
- 7% infill, line pattern
- 30 mm/s speed
- ironing on (I) or ironing off (NI)
- Brim bed adhesion (Brim) (optional on all, needed when noted)
This is the following breakdown of each piece, material weight, and time:
Walls
- Ankh with chariot 171g 27:44 (NI)
- Winged Sun with soldiers 171g 27:08 (NI)
- Straight Plain 168g 25:58 (NI)
- Corner Wall 100g 15:15 (NI)
Tower (all "door" parts come pre-supported)
- Bot Stairs 22g 4:28 (I)
- Bot door plain 49g 9:05 (NI) (Brim)
- Bot door w/ triangles 52g 9:37 (NI) (Brim)
- Bot wall right 49g 8:54 (I)
- Bot wall plain 46g 7:40 (NI)
- Bot wall left 49g 8:54 (I)
- Bot w/ plaints 47g 8:34 (NI)
- Mid Landing 19g 3:28 (NI)
- Mid Landing solid 22g 4:01 (NI)
- Mid arrow slots 27g 5:58 (NI) (Brim)
- Mid door plain 48g 9:16 (NI) (Brim)
- Mid door w/ archer 48g 9:18 (NI) (Brim)
- Mid Plain 47g 8:15 (NI)
- Mid w/ Snakes 48g 8:52 (NI)
- Stairs 1 31g 6:12 (I)
- Stairs 2.1 17g 3:28 (I)
- Stairs 2.2 10g 2:08 (I)
- Stairs 3.1 12g 2:30 (I)
- Stairs 3.2 27g 5:20 (I)
- Top battlements 35g 7:13 (I)
- Top 1 42g 7:44 (NI)
- Top 2 41g 7:35 (NI)
- Top Solid 45g 8:16 (NI)
Gate
- Gate Behind Left 79g 13:41 (I)
- Gate Behind Right 79g 13:46 (I)
- Gate door left bot 9g 1:53 (NI) (Brim)
- Gate door left top 9g 2:05 (NI) (Brim)
- Gate door right bot 9g 1:56 (NI) (Brim)
- Gate door right top 10g 2:09 (NI) (Brim)
- clip the supports on the gate hinges, and trim top hinges as needed to fit and stay in place on gate.
- Gate sup left bot 96g 14:12 (NI)
- Gate sup left top 59g 9:16 (NI)
- Gate sup right bot 96g 13:52 (NI)
- Gate sup right top 59g 9:13 (NI)
- Gate top 51g 11:06 (I)
- Gate top overhang 20g 4:13 (I)
Obelisk 31g 6:08 (I)
Obelisk Damaged 31g 6:04 (I)
| Date de publication | 18/10/2021 |
| Price | $10.00 |