This is an Oil Pan remix for the Ford FlatHead V8 engine.

Original engine : https://www.myminifactory.com/object/3d-print-106731

My final project : https://www.myminifactory.com/fr/object/3d-print-170105

Features
. Gaskets
. Oil Pan remix (for Dispstick)
. Oil Pan Starter Flange remix (closed)
. Oil Pan Disptick
. Starter enclosure

Print Settings
1 x OilPan : Layer:0.15mm Raft:no Brim:no Support:yes Infill:15%
1 x OilPanDipstick : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100%
1 x OilPanDipstickGasket : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
1 x OilPanDipstickHolder : Layer:0.15mm Raft:no Brim:no Support:yes Infill:100%
1 x OilPanGasket1 : Layer:0.15mm Raft:no Brim:no Support:no Infill:80%
1 x OilPanGasket2 : Layer:0.15mm Raft:no Brim:no Support:no Infill:80%
1 x OilPanGasket3 : Layer:0.15mm Raft:no Brim:no Support:no Infill:80%
1 x OilPanStarter : Layer:0.15mm Raft:no Brim:no Support:yes Infill:30%
1 x StarterBack : Layer:0.15mm Raft:no Brim:no Support:no Infill:30%
1 x StarterConnector : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
1 x StarterDriveGear : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
1 x StarterFront : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%

Accessories
18 x 4mmx2mm disk magnet
3 x m2x3mm SHCS
3 x m2 lock washer
14 x m3x2mm SHCS
1 x m3x45mm SHCS
3 x m3x8mm SHCS
1 x m4 jam nut
1 x m3 set screw
1 x 150mm electric wire
1 x electric motor : https://www.amazon.fr/gp/product/B072X7CSNS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
1 x Braided sheath 3mm-8mm : https://www.amazon.fr/gp/product/B07F8YRY3T/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
1 x jack connector : https://www.amazon.fr/gp/product/B07QPZTHDK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Assembly
Look at pictures.