This is an Engine Stand extension for the Ford FlatHead V8 engine.

The mounting holes are already present on the engine block.

Original engine : https://www.myminifactory.com/object/3d-print-106731

My final project : https://www.myminifactory.com/fr/object/3d-print-170105

Release
01/02/2021 : The file EngineStandBackRightV2.stl replaces the file EngineStandBackRight.stl ; with this update you can remove the oil pan.

Print Settings
1 x EngineStandBackLeft : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandBackLeftSpacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
1 x EngineStandBackRight : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandBackRightSpacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
1 x EngineStandBottom : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandClasp : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandFrontLeft : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandFrontRight : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandLogo : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandLogoSupport : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%

Accessories
14 x m3 threaded insert
2 x m2x5mm SHCS
18 x m3x8mm SHCS
2 x m3x30mm SHCS
10 x m3 washer
2 x m3 jam nut
1 x electric wire (~20cm)
1 x variable speed controller : https://www.amazon.fr/gp/product/B07MPWGF7P/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
2 x DC female panel mount jack : https://www.amazon.fr/gp/product/B07QPZTHDK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Assembly
Look at pictures.