Fruit bowl “Sand”
763
views
2
collections
Community Prints
Add your picture
Soyez le premier à partager une photo de l'impression de cet objet
0 comments
Loading comments...
$3.00 Fruit bowl “Sand”
3D
Published 2023-01-24T11:23:44+00:00
6
0
Add to Collection
Description
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
A unique fruit bowl made from 3d printed parts and commercially usual wooden skewers.
It uses very little material and is easy to assemble.
Instructions
- Print the base
- Buy a pack of wooden skewers –26 are required (you can get them for a dollar in most super markets or online) Size: 200mm x 3mm
- Choose your tolerance: the design is provided with 0,1 for normal and 0.2 mm clearance for less accurate printers. Make your decision based on your experience with the accuracy of your machine. I used 0,1 and since the wood is soft it fits very well, and the skewers don’t fall out.
- Place the skewers with the pointy side in the base
- Enjoy!
Size assembled: 200 x 200 x 140 mm
This is the V2, the V1 is still included.
Détail de l'impression
- Required build volume: 130 x 130 x40 mm
- Material usage: 20g
- Print time: 3h
- Material: PLA
- Print direction: stl is rotated correctly, check images
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 3
- Infill: 15%
- Build plate adhesion type: none
Technical Information
| Date de publication | 24/01/2023 |
| Price | $3.00 |
| Sans support | YES |
More Information
Object Parts