iPhone 12 Protective Case
$5.00 iPhone 12 Protective Case
3D
Published 2023-01-08T15:19:29+00:00
Cases: https://www.myminifactory.com/users/jmunkki/collection/phone-cases
Mounts & Accessories: https://www.myminifactory.com/users/jmunkki/collection/phone-mounts
This 3D-printable phone case is the perfect accessory for anyone looking to protect their phone from everyday wear and tear. Designed to be printed using inexpensive and durable TPU material, this case withstands the rigors of daily use while still being comfortable to hold. The flexible material helps protect the corners of the phone even when dropped on to a hard surface.
I also offer a cradle model designed specifically to fit this case, offering smooth one-handed operation and connection to a Lightning cable.
The case slips on and off easily and you can fit parking validation cards, receipts, a bill or a credit card between the back of the phone and the case.
More art designs, phone sizes and mounting options will be added in the near future, so please follow my account to stay up to date.
This case design has been in daily use for about a year now and has proven to be durable and work well. While the iPhone 13 and 14 are very close in design to the 12, the button and camera placements are slightly different. I will be publishing versions of the case for other Apple phones soon, so leave a note to vote for what you would like to be released next.
Use a low cost semi-flex or flexible TPE/TPU filament for best results. The case can be printed using more rigid materials, but it may be difficult to slip onto the phone unless the print is also scaled up slightly or the sides are cut to make it flex more.
I do not use supports when printing the cases. This means there are some long bridges near the top of the model and you will probably have to clean off the corners a little using side cutters or nail clippers.
Layer height: 0.2mm
Nozzle: 0.4mm
The first 2-3 layers of the print can be printed using concentric infill as a style effect. I recommend switching to a more durable infill such as rectilinear so that at least 1-2 layers of the bottom form a mesh.
| Date de publication | 08/01/2023 |
| Price | $5.00 |
| Durée d’impression | 60 - minutes |
| Quantité de filament | 11 grams |
| Sans support | YES |