KS4PNK16 - Jubilee Cliffs
$25.00 KS4PNK16 - Jubilee Cliffs
3D
Published 2023-11-01T21:18:51+00:00
Jubilee Cliffs was the major stretch goal from our 4th kickstarter that took far longer than we expected. At the time we first showed it off, we had about two dozen models in the set. Two hard drive crashes ended up causing it to take over a year to finish. Each time we began anew, we built on what we had learned. Now Jubilee Cliffs releases with 170 models of 1inch to 4inch water cliffs and features. We hope it finds a welcome place on your tabletop.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Larger Terrain pieces can suffer with lightning infill.
| Date de publication | 01/11/2023 |
| Price | $25.00 |
| Sans support | YES |