LCT PP19-01 "Vityaz" midcap mag
LCT PP19-01 "Vityaz" midcap mag
3D
Published 2018-07-18T09:06:29+00:00
Necesitaba varios mags para mi PP19 y debido a problemas con la aduana de mi país no pude importarlos por lo que decidí diseñar e imprimir algunos.
Para armarlo se necesitan:
2 resortes (uno de 5mm x 400mm y otro de 2/3mm x 8/10mm)
10 tornillos de 4mm x 20mm para fijar el interior
2 pernos de 2mm x 28,5mm para fijar el mag
Espero que les sirva!
***********
I needed several mags for my PP19 and due to problems with the customs of my country I could not import them so I decided to design and print some.
To assemble it, you need:
2x springs (one of 5mm x 400mm and another of 2 / 3mm x 8 / 10mm)
10x screws of 4mm x 20mm to fix the interior.
2x 2mm x 28.5mm bolts to fix the mag.
I hope you find it useful!
Imprimí el interior en ABS y los suavicé con acetona para que los BBs fluyan suavemente, en el exterior utilicé PLA para que quede mas rígido.
***********
I printed the interior in ABS and softened them with acetone so that the BBs flow smoothly, on the outside I used PLA to make it more rigid.
| Date de publication | 18/07/2018 |
| Dimensions | 80mm x 30mm x 200mm |