Lobster/Maine Clock
Lobster/Maine Clock
3D
Published 2017-06-30T15:19:46+00:00
This is a clock that I designed in Fusion 360. It can be printed through a single extruder just using the shape of Maine or just the shape of the lobster. It can also be printed on a dual extruder printer by aligning the two files holes. I used a dual extruder printer for this one but feel free to experiment. I printed mine in Hatchbox PLA, and I had it come off the build plate. That is why the back of the print is not quite finished. I used a little clock mechanism that can be found at Hobby Lobby or Michael's. The width of the hole is 8mm and the depth is 5mm. If these are not the dimentsions you need you can always scale it up or down, or use a drill to widen it.
Printer:
Qidi Tech I
Resolution:
0.3mm
Bed temperature:
70 degrees C
Plastic:
PLA
Infill:
20% or 25%
| Date de publication | 30/06/2017 |
| Durée d’impression | - 150 minutes |
| Technologie | FDM |
| Complexité | Easy |
| Sans support | YES |