Lost in Space Chariot /MINI-Z 4x4 Body
Lost in Space Chariot /MINI-Z 4x4 Body
Published 2022-09-13T09:14:11+00:00
It is a part that remodels Kyosho's mini-z 4x4 into a Netflix version lost in space chariot with a 3D printer.
Please refer to the stl data and video in "others-assembly_reference" for assembly.
------------------------------
Reference of print settings
All parts are basically 3D printed with a layer height of 0.1 mm.
"Body_rear_detail_4-mesh_parts_white.stl" is output by processing gcode only the raft part of the slicer.
It is recommended to use an equivalent wire mesh etc. for this part instead of 3D printing.
"Glass.stl" is made by cutting a plastic plate with a thickness of 0.3 mm.
------------------------------
京商のミニッツ4x4を3Dプリンターでネットフリックス版ロストインスペースのチャリオットに改造するパーツです。
組み立ては 「others-assembly_reference」 のstlデータと動画を参考にしてください。
------------------------------
プリント設定の参考
部品は基本的に全てレイヤーハイト0.1mmで3Dプリント。
「body_rear_detail_4-mesh_parts_white.stl」はスライサーのラフトの部分のみをgcodeを加工して出力しました。
このパーツは3Dプリントではなく、相当する金網などの使用を推奨します。
「glass.stl」は厚さ0.3mmのプラ板をカットしました。
Date de publication | 13/09/2022 |