Main-Rotor-Head, Fully Articulated Type, Optional Part
Main-Rotor-Head, Fully Articulated Type, Optional Part
3D
Published 2021-07-15T09:48:46+00:00
This is an optional part for the Main Rotor Head (MRH) uploaded earlier. See the URL below.
https://www.myminifactory.com/object/3d-print-main-rotor-head-for-helicopter-fully-articulated-type-75364
The purpose of this part is to prevent the MRH from slipping down relative to the pipe.
Assembly Information
- See photo and image
Download files includes;
- files: MRH-Stopper01.stl
Purchase Parts Information;
- Micro screws M1.4x6L - 4 ea
Total Net Print Time: Approx. 16 min.
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted by your experience.
3D printing settings
No Raft and Supportis required.
Layer Height, Infill: Depending on your experience.
I printed by "idbox" using with 0.4 nozzle, 1.75 PLA.
See above.
| Date de publication | 15/07/2021 |
| Sans support | YES |
