Mariachi Coat Hanger
$15.00 Mariachi Coat Hanger
3D
Published 2023-10-11T10:47:51+00:00
Why pay for this single file when you have over one thousand more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for Premium 3D-Printing models. Get started with the Ultimate STL platform!
Mariachi Coat Hanger
This STL file is recommended for FDM Printers!
3D Printing Time: 3 Days 05 Hours 53 Minutes
Approximately Height : 19,5 cm
This coat guardian is always in a good mood.
In order to assemble this model, please watch the video instructions and follow this step-by-step assembling guide:
CLICK HERE
1) Fit both Left Bigger Gear and Right Bigger Gear into the Box with the doors closed;
2) Put the Hook inside the Box up to the marking;
3) Place Screw 1 and Screw 2 inside Smaller Gear 1 and Smaller Gear 2 respectively, then place both inside the Box.
4) After placing both Smaller Gears inside the Box, secure them in with your hands while you attach Washer 1 and Washer 2 from the outside on the back of the model;
5) Glue the Mariachi’s slot into the hook and the other one on the box.
COPYRIGHT & SELLING RIGHTS
This STL file is copyrighted by STLFLIX©, the Ultimate STL Subscription. This means you can print it for yourself, but you DO NOT have the right to sell it.
To acquire copyright & selling rights, you must subscribe to our Commercial License. By doing so, you will also get immediate access to over 500 STL files, unlimited downloads, and marketing content for every single file.
Go commercial and skyrocket your own store with STLFLIX!
USEFUL LINKS
Get to know us a little better!
Website | Instagram | TikTok | Twitter
What are you waiting for? Join thousands of other makers from all around the world.
HAPPY PRINTING!
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Date de publication | 11/10/2023 |
| Price | $15.00 |