Mini Sumo Robot Rev 10
2,560
views
105
downloads
Community Prints
Add your picture
Soyez le premier à partager une photo de l'impression de cet objet
0 comments
Loading comments... 
Mini Sumo Robot Rev 10
3D
Published 2021-08-29T18:40:42+00:00
1
0
Add to Collection
Description
This sumo robot is a mini sumo robot. Designed to fit inside a 10 cm area. Not only that it is battery operated with rechargeable 3.7v AAA sized batteries. Here's what you will need to build this.
- All printed parts. You need to print 1 of each and two motor holders.
- 5v regulator.
- Proximity sensors of your choice.
- Pololu QTR reflectance ir sensors.
- 2 Pololu 50:1 micro gear motor and 32mm wheels.
- A small power switch.
- 3mm screws.
- Arduino nano with gpio exansion shield.
- Hot glue and zipties.
Détail de l'impression
The main chassy needs a ton of support material but only support material that is touching the build plate. The rest you do not need.
Technical Information
| Date de publication | 29/08/2021 |
| Durée d’impression | 5 - minutes |
| Dimensions | 100 by 100 by 80mm |
More Information
Object Parts