Missile Pod-style Battery Holder AA/AAA /2Hatch Type
Missile Pod-style Battery Holder AA/AAA /2Hatch Type
3D
Published 2022-10-19T08:27:20+00:00
Missile pod style AA and AAA battery holders.
I made two types for AA and AAA.
Please refer to the stl data and video of "others-assembly_reference" for assembly and usage.
Since the cowl part is a separate part, it can be printed in a different color.
"aax4-pod case-body" and "aax4-pod case-cowl" are for AA.
"aaax4-pod case-body" and "aaax4-pod case-cowl" are for AAA.
-------------------------------------------------
Reference for print settings
Recommended layer height 0.2mm.
All data can be 3D printed without support on FDM 3D printers.
Use a nipper to cut the small triangular support on the part where the cowl of the "pod case-body" attaches.
There is a 0.2mm gap in the height direction of the small triangular support of the "pod case-body".
Before assembling, move the hatch part repeatedly so that it opens and closes smoothly.
If the interfering part is not smooth during temporary assembly, it can be improved by slightly finishing the steps of the layers with sandpaper.
| Date de publication | 19/10/2022 |
| Sans support | YES |