Mold Making Kit for ANY Die or Dice
$25.00 Mold Making Kit for ANY Die or Dice
3D
Published 2021-02-11T09:14:57+00:00
This kit contains all the pieces that you will need in order to make a silicone mold of any die you have.
The Insert and the Slide work together to capture the die that you intend to mold. You should be able to get any die upto about 30mm inside.
The shell halves are designed to snap together and then the caps are threaded on to secure everything in place. There are fill lines on the inside showing how many ML of silicone you'll need for the mold. There are also dashed lines molded into the side of the silicone to show you where to cut if you are making a cut mold.
Print the insert and the slide ideally on an SLA printer. THe rest can be printed on any FDM printer, but be sure to seal it afterward so silicone does not leak inside of the print. You can use certain glues or heat to besure it is sealed entirely.
| Date de publication | 11/02/2021 |
| Price | $25.00 |