Montini Death of Lucretia Wall Set (Lego Compatible)
Montini Death of Lucretia Wall Set (Lego Compatible)
3D
Published 2020-07-20T12:32:44+00:00 • Remixé depuis The Death of Lucretia, Montini building bricks Two Pip Set (Lego Compatible), Montini building bricks Pip Strip Set (Lego Compatible), Montini building bricks Female Plate Set (Lego Compatible)
This set of Montini bricks forms a tragic relief of "The Death of Lucretia". The subject mater may be inappropriate for children. Visit the original art scan for details on the story.
Just like the vintage original Montini parts, these are compatible with classic Lego full height bricks.
Montini building bricks were produced from 1961 to 1969 in the Netherlands. They were originally made from soft, pliable polypropylene. The diagonal fins bend slightly around the pips of the other block.
puppenhausmuseum.de/montini-bausteine.html
Please do not mix these with original Montini parts. PLA is much harder than the original bricks, and the layer ridges act like sand paper. You will wear out the original Montini bricks very quickly.
I would love to see your make!
Original art scan:
www.myminifactory.com/object/3d-print-the-death-of-lucretia-33663
Printer brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: .15
Infill: 25
Notes:
These are optimized for a 0.4mm nozzle. They are friction fit parts, so tolerances are important. I set the Horizontal Shells Top to 7, and Bottom to 10 to allow for the relief to have infill, but the brick to be solid. In Slic3r PE I set "Elephant foot compensation" to 0.07.
These parts need supports: 0_0_Death_of_Lucretia.stl 1_0_Death_of_Lucretia.stl 1_3_Death_of_Lucretia.stl 2_0_Death_of_Lucretia.stl 3_0_Death_of_Lucretia.stl 3_2_Death_of_Lucretia.stl 4_3_Death_of_Lucretia.stl 0_5_Death_of_Lucretia.stl 1_5_Death_of_Lucretia.stl 1_7_Death_of_Lucretia.stl 2_5_Death_of_Lucretia.stl 2_6_Death_of_Lucretia.stl 3_6_Death_of_Lucretia.stl
| Date de publication | 20/07/2020 |