NR200P Back Panel Mod
NR200P Back Panel Mod
Published 2022-01-08T11:30:31+00:00
NR200P to NR200P MAX back panel mod
This is a 3d printable back panel made for the Cooler Master NR200P to allow for a vertical mounted GPU aswell as a top mounted AIO. The printed mod changes the positition of the motherboard down 26.5mm, GPU down ~63.5mm and moves the internal power cord to the bottom of the case.
This mod was made out of the necessity of being unable to buy a NR200P MAX but still wanting to top mount an AIO with a vertical GPU in the NR200P, I say after all the struggle to get a GPU in todays market why hide it behind a mesh panel.
This is designed to print on the CR-10, your printer will need to have a build plate of at least 275mm x 200mm to be able to print in one piece
Currently only supports a two-slot graphics card
A GPU support block is also included in this upload it is not necessary to print but for optimal support of the GPU its a good idea, it simply fits between the GPU and a 25mm fan mounted to the bottom panel in the case.
This model was printed on the Creality CR-10. Id highly recommend that it is printed in one piece for the rigidity.
Its recommended to print this model in PETG, but PLA or abs should be fine this part probably wont melt
Its dimensions are 263mm x 175mm x 16.2mm (10.35"x 6.8"x 0.63")
This model can be printed without support if your settings are good enough to clear the minimal overhangs it has, but I'd recommend printing with support for the best results.
This model should be printed with atleast 15% infill, 3 top/bottom layers and 3 walls
Skirt recommended for minimal cleanup
Finished print for the back panel took just under 13hrs and was just shy of 80grams
print at 100% scale
To undertake this project you'll need
- 3d printer
- metal file/grinder
- Drill
- 3/32" drill bit
- 4 m3-8mm bolts and corresponding nuts (button/flat/pan head style suggested)
- 8 small washers
- a philips head screwdriver
Link to imgur for guide: https://imgur.com/a/RCJNyMv
Date de publication | 08/01/2022 |
Dimensions | 263mm x 175mm x 16.2mm |