Open RC Car V3 - Exterior
Open RC Car V3 - Exterior
Published 2021-08-23T09:14:52+00:00
I made an exterior and interior of the OpenRC Car V3, Here you can find the files ONLY for the EXTERIOR! (The files for the interior are going to be uploaded as an other post.)
The STL's of the chassis you can find here: RC V3 Chassis STL's
Necessary materials:
- 4x M4 - 25 bolts
- 4x M4 nuts
- 4x M2 - 12 bolts
- 4x M2 nuts
Here is a playlist with all the videos I made about this OpenRC Car V3: All videos about this project
Make sure you use supportstructure for part 1 (front), after it you can use sandpaper to clean it up like I did.
You have to print an unfolded roof, if it's printed you can fold it with a little bit of glue (I used loctite).
If there are any questions, please let me know in the comments, here or in the comments of my Youtube channel (Creative Electronics)!
Happy 3D Printing ;))
I used blue and white PLA for this exterior.
- Printspeed: 50 mm/s
- 0,15 - 0,2 mm Layer Heights
- 30% Infill
- Supports for Part1 (The front of the car)
Date de publication | 23/08/2021 |