Pez Inspired Battery Dispenser
Pez Inspired Battery Dispenser
3D
Published 2022-08-01T09:51:01+00:00
Stores up to 4 AAA Batteries that can be individually dispensed by flipping the lever on the Pusher piece.
"Detailed" files have more of an eye-catching design, while “customizable” can be easily edited to enable you to make more personal versions.
Feel free to remix with your custom additions!
Parts
Printed
- Magazine
- Slide Cover
- Lifter
- Pusher
Non-Printed
- 2 Springs (about 40 mm in length and inner diameter of ~4.5mm)
- Glue (Recommended)
- AAA Batteries
Assembly
All parts except the Pusher can be printed with no supports. Ensure your material choice for the Slide Cover has good layer adhesion or print it on it's side, as it will have a lot of upward pressure on it.
- Glue Springs to Lifter
- Insert Lifter into Magazine
- Align Springs in Magazine, Glue in place
- Snap Pusher into Magazine
- Load AAA Batteries into Magazine
- Slide the Slide Cover on to the matching grooves
Most of the prints are pretty simple, just print the Pusher with supports, and make sure the Slide Cover has some strength in the vertical dimension.
| Date de publication | 01/08/2022 |