Pipe Planter (Mario Themed) With Drip Tray (2 Versions)
Pipe Planter (Mario Themed) With Drip Tray (2 Versions)
3D
Published 2022-12-18T22:52:38+00:00
The inner dimensions of this planter are approximately 4" in diameter with a 4" depth. The inner wall of the planter slopes to an upside-down dome shape, with a single hole for drainage. I have also included an STL for the matching drip tray.
I have included 2 separate versions because some people have different preferences/printer capabilities.
Version 1:
- This version is a single STL (v1 Pipe Planter Single Piece) and is best-printed upside down. You will either need supports for the innermost part of the dome,
or good bridging if you don't want to use supports and desire a clean finish. If you aren't concerned with the finish around the inner part of the drain hole, you can print it just fine with no supports!
Version 2:
- This version is 2 separate STL's (v2 Pipe Planter Piece 1 and v2 Pipe Planter Piece 2) and is meant to be assembled with adhesive afterward. The first STL is for the main body of the planter, and the other STL is for the upper rim of the planter. This will allow you to print the main body right-side-up and avoid using any supports, then just glue the two pieces together afterwards.
**These files are uploaded with a non-commercial license. If you are interested I have a Patreon that gives my subscribers access to all of my files and the permission to with what they please with what comes off their printer: https://www.patreon.com/thinair3D
Both Versions:
- Infill: 5-10% is fine, but may be able to get away with 0% infill and additional walls.
- Layer Height: 0.2-0.28 works well. I've printed as high as 0.28 with great quality.
Version 1:
- v1 Pipe Planter (Single Piece)
- Best printed upside down, may need supports for the innermost part of the dome (depending on your bridging quality). Also may be a good idea to print slowly during the top dome part.
Version 2:
- v2 Pipe Planter (Piece 1) & v2 Pipe Planter (Piece 2)
- There is 0.2 mm of clearance between the main piece and the upper rim, so as long as your extrusion is dialed in you shouldn't have a problem assembling afterward.
- If you have any issues with fit, please just let me know and I can send you new files with adjustments. I plan on adding more options for clearance soon.
| Date de publication | 18/12/2022 |
| Sans support | YES |