Pocket Tacklebox - Remix
3D
This is a remix of https://www.myminifactory.com/object/3d-print-pocket-tacklebox-44779 which is a pocket tacklebox by @Ghost_4444. I was having issues with the overhangs and completely remodeled, adding a chamfer to the lid, the slot on the housing and reduced the radius of the fillet on the bottom of the housing. Some of the dimensions may have changed a bit but, the original dividers were tested to work. Please note that I seem to have a better fit scaling the dividers up to 101% and you may have to adjust to suit. The lid and housing are new files and the dividers are the original ones provided by @Ghost_4444.
Here is the link to the onshape document. I am very new to 3d Design and this is my first real attempt at creating a model to print.
https://cad.onshape.com/documents/de0c9aa5e308830fe1888e79/w/b91960c120ee2b20824d819f/e/2d7e342c4e0e894142c00aff
I have printed in PLA, PLA +, PA6-GF and ASA using many different settings but, the attached photos were printed using:
Ender 3 V2 with Microswiss NG
.06 nozzle
3DFuel Tough PLA in Lulzbot Green and Gray
.28mm layer height
60mm/s speed
.08 retraction
2hr15m print time
| Date de publication | 14/08/2023 |
| Durée d’impression | 135 - minutes |
| Quantité de filament | 54 grams |
| Dimensions | 150mm x 75mm x 20mm |
| Technologie | FDM |
| Sans support | YES |