PS5 Disk Panel STL File
$10.00 PS5 Disk Panel STL File
3D
Published 2021-07-20T08:58:40+00:00
These are side panel files for the DISK PS5, they require a large format printer to be printable, printers such as a CR-10 or likewise build volume.
The panels are fairly straight forward to print.
When installing the panels make sure you have all the clips alligned on the back and push downwards on the corners of the panels and then push up to push the clips in and to avoid breaking them. this step is optional but to reduce vibrations at the top of the flat panel I quickly made a little support beam that you can add when slicing it will help keep the flat panel steady as it gets higher in the print. (the file is the one called 'support for flat panel') I printed these with a 0.2mm layer height at 45mm/s and it took around 2 and a half days to print.
I also please ask that you do not distribute or sell these files. Thankyou
Print with a Brim, especially for the flat side panel.
Print the clips on the back slower and with 100% infill
I would drop the panel about 2mm below the build plate to make the bottom flat as well.
The settings I used were 10 - 20% infill, 45mm/s print speed, 10mm brim, Any layer height, lower is better for detail, No support and 0.4mm nozzle with 2 perimeters.
| Date de publication | 20/07/2021 |
| Price | $10.00 |
| Quantité de filament | ~ 500 grams |
| Dimensions | 300x20x400 |