Qi'ra High Roller Belt Box and Pendant
Qi'ra High Roller Belt Box and Pendant
3D
Published 2021-01-06T14:03:06+00:00
These files are for the back belt and pendant as worn by Qi'ra in Solo, these might be approvable for the "high roller" CRL for the 501st legion at their current scale (use at your own risk, no guarantees on approval guys!). They are sized to fit a 1.5 inch belt and print as 2 pieces fitting together over the belt clamshell style. There is an internal piece and an overlap at the front which should allow them to be glued together for permanent attachment. Some slight modification may be required if your belt is very thick, right now it can accomodate a ~2-3 mm thick beltbut could easily be scaled in the z-axis to fit a larger belt.
If you're looking for finished prints please contact us through our store - we will be offering finished versions of these for sale. Don't mind the rough print photos - these are rough prints with some quick filler primer on them.
Designed for printing with SLA printer, FDM print at your own risk
| Date de publication | 06/01/2021 |