Rainbow Sword
Rainbow Sword
3D
Published 2020-01-31T17:03:51+00:00
After creating rainbow mace now it's time for rainbow sword.
You can choose from three different handle styles(HandleA_ver1-3.stl).
Then you need to print HandleB, GuardA, GuardL, BladeA, BladeB, BladeC and six Pins.
Stls are oriented upwards so you need to reorient them in a slicer.
There is also SwordInOnePiece so you can split it however you like.
I've designed it so you can insert a M6 threaded rod about 460mm long to reinforce it.
Also CA glue or 3D Gloop is needed to connect the parts. Pins are just for easier positioning.
You can watch my video about this sword on my youtube:
youtu.be/vhozpqdJcE0
In order to maintain smooth color change I've cut off 10 meters of filament, inserted it the other way round and printed the handle. Next swap the filament and printed other parts normally.
I've used Eryone Silk Mini Rainbow PLA :
https://amzn.to/2smc8Db (affiliate link, you pay nothing extra, I get some change)
You can support me in various ways:
smash the like button and/or subscribe to my channel:
https://bit.ly/medyk3Dsub - that really helps me, thanks!
check Trianglelab on Aliexpress:
https://bit.ly/AliExpressTrianglelabs - affiliate link, you pay nothing extra, I get small change, I am not sponsored by them, they just have great price/value ratio for 3D printer parts and a free shipping
buy me a coffee:
https://www.buymeacoffee.com/TmjEfCc
Share the love and 3D print everything.
Many thanks to the whole 3D printing community.
Assembly
Glue all three parts of the blade(BladeA, BladeB, BladeC), glue GuardL andGuardR. Use pins for easier orientating the pieces.
Use drill to insert the threaded rod into the blade, then insert glued Guard, lastly thread HandleB(flat side down) and HandleA.
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0,2
Infill: 15%
Filament: Eryone PLA Rainbow
Notes: You can use brim for better adhesion for long parts. Guard parts can be printed with supports.
| Date de publication | 31/01/2020 |
| Durée d’impression | 42 - 43 minutes |
| Quantité de filament | 156 |
| Dimensions | about 600mm high |