Rake MK2
$2.70 Rake MK2
3D
Published 2021-09-27T16:35:12+00:00
A 3D printable single piece, robust and durable, larger Garden Rake, designed to rake soil, sand, pine-needles, leafs and other materials in your garden, flower beds or at the beach.
This design is a much stronger upgrade of our MK1 original 3-pieces design. It is optimized for a 0.6 mm nozzle and can be easily 3D printed, without any support, on a large-size hobbyist 3D Printer such as the CR-10, the Sidewinder X1 or other similar printers, with a build area of 300 mm X 300 mm (~11.8” X 11.8”) or larger.
It can be printed with a variety of materials, including PLA, PETG, ABS, ASA and many other types of printable materials.
PLA works well for this application as long as the parts will not be used, stored or kept in a high temperature environment, exceeding ~55 C (~ 130 F).
PETG and ASA are other excellent choices.
The object should be durable, easy to maintain, and last for a long time.
Recommended print settings with a .6 mm nozzle
- Layer Height: .2 mm
- Line width: 0.75mm
- 4 perimeters or shells (3 mm)
- 15 bottom layers (3 mm)
- 15 top layers (3 mm)
- Infill 15%~20%, depending on infill type
Recommended print settings with a .4 mm nozzle
Note: A 0.4 mm nozzle requires a sightly larger shell to maintain the same part strength. Therefore we recommend adding one or two additional perimeters as well as one extra top and one extra bottom layer.
- Layer Height: .2 mm
- 8 perimeters or shells (3.6 ~ 4.0 mm)
- 16 bottom layers (3.2 mm)
- 16 top layers (3.2 mm)
- Infill 15%~20%, depending on infill type
| Date de publication | 27/09/2021 |
| Price | $2.70 |
| Durée d’impression | 370 - 500 minutes |
| Quantité de filament | 136 grams |
| Dimensions | 294 mm X 100 mm X 30 mm |
| Sans support | YES |