Ravensburger - Abstract Towers
Ravensburger - Abstract Towers
3D
Published 2019-10-25T16:31:19+00:00
Reimagine the World of Labyrinth - Ravensburger competition
Hello there! Thank you for taking a look at my creations!
I modeled these abstract towers to be easily printed by FDM printers on standard layerheights (0.2, 0.1, or even 0.05) with the most common 0.4 nozzle size WITHOUT any support needed. For extra safety I advise printing these with a raft, as they are taller than wider. Resin printers should do the trick too, but I don't own one so I couldn't test.
I wanted to create figures which can be easily identified even at distance, so you won't need to have 4 different coloured spools of filament laying around. Altough you can paint the figures if you want for even easier identification.
An added bonus is that each of these 4 figures give a different sound when you are moving on the board with them :)
Printed on Anycubic i3 Mega
Material: Anycubic PLA
Nozzle size: 0.4 mm
Layerheight: 0.1 mm
No need for supports!
Speed: 20 mm/min
Raft enabled
| Date de publication | 25/10/2019 |
| Dimensions | 10×10×39 |
| Sans support | YES |