Round Planter Abstract | Vase Mode | Shelled | Slimprint
Round Planter Abstract | Vase Mode | Shelled | Slimprint
3D
Published 2022-06-13T08:48:39+00:00
An easy-to-print round planter, which you can print in both vase mode (single wall) and normal mode (with several walls).
Perfect for indoor plants such as succulents and cacti.
Size: 12.9 x 12 cm (scale as you like)
Weight: 40 - 120 grams
I recommend printing the plant pot with a 0.6 mm nozzle or larger to ensure it is strong and watertight and will last a long time.
You can affect the strength of the walls by increasing the layer thickness.
Would you like to print this planter waterproof in vase mode? Then use a layer height of 0.15 - 0.2 mm print slowly to ensure that the layers adhere well.
I've also included a shelled version.
Happy printing
Vase mode
Nozzle size: 0.6+
Layer height: 0.15 - 0.2 mm
Layer width: 0.6 - 1.2 mm
Print speed: 30 mm/sec
Print time: 3 - 6 hours
Tip: Print hot (+5 - +10 degrees) for improved layer adhesion
Vase mode enabled (spiralize outer contours in cura, spiral vase in prusaslicer)
Normal mode - shelled
Nozzle size: doesn't matter
Layer height: 0.15 - 0.4 mm
Layer width: 0.4 - 0.6 mm | 2 - 3 walls
Print speed: 30 - 60 mm/s
Print time: 5 - 14 hours
Non commercial use only.
| Date de publication | 13/06/2022 |
| Durée d’impression | 240 - minutes |
| Quantité de filament | 40 - 120 grams |
| Dimensions | 129 x 120 mm |
| Sans support | YES |