Soap dish “bubbles”
596
views
2
collections
Community Prints
Add your picture
Soyez le premier à partager une photo de l'impression de cet objet
0 comments
Loading comments...
$3.00 Soap dish “bubbles”
3D
Published 2023-06-30T11:22:29+00:00
7
0
Add to Collection
Description
Would you like to support my work? :)
Check out my full catalogue with exclusives, early access and commercial licences.
An elegant soap dish with drainage in the style of my bubbles series.
3MF Multicolor files for bambulab AMS included!
Cleaning: Empty out the drain when it is full. I advise to clean the product (as you should do with every soap dish) a few times a year. Best results are achieved with a regular old toothbrush. Scrub it for a minute or two under running warm water.
Size assembled ca: 105 x 105 x 15 mm
Photos by Maison Lumiere
Détail de l'impression
- Required build volume: 110 x 110 x 20 mm
- Material usage: 45g in total
- Print time: 4-5 h in total
- Material: PLA
- Print direction: stls are rotated correctly, check images
- Support: none
- Nozzle size: 0,4 mm
- Line width: 0,4 mm
- Layer height 0,2 mm
- Outer walls: 3
- Infill: 20%
- Build plate adhesion type: none
- Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.
Technical Information
| Date de publication | 30/06/2023 |
| Price | $3.00 |
| Sans support | YES |
More Information
Object Parts