Spinner for 608 bearings
Spinner for 608 bearings
3D
Published 2021-05-24T09:03:42+00:00
A simple spinner. 85mm diameter.
2 files to be printed: the spinner body and the caps of the bearing (you need to duplicate it).
Hardware required: 4 bearings 608 (Dext = 22mm;Dint = 8mm; h = 7mm).
Layer height 0.2mm. Printng speed 50 mm/s. The caps and the bearings fit perfectly in each hole. However, you may need to scale the models a bit under 100%, specially the caps, depending on your printer's accuracy. If it's good, you shouldn't have any problem.
Once printed, introduce the bearings in the big holes holes (there are 4), introduce the caps in the center bearing hole (upwards and downwards), make it spin and enjoy!
You can lubricate it to make the spinner to spin much more.
| Date de publication | 24/05/2021 |
| Durée d’impression | 60 - minutes |
| Dimensions | 85mm x 7mm |
| Sans support | YES |