Stardew Valley Junimo
Stardew Valley Junimo
3D
Published 2020-03-28T22:20:14+00:00
░░░░░██╗██╗░░░██╗███╗░░██╗██╗███╗░░░███╗░█████╗░
░░░░░██║██║░░░██║████╗░██║██║████╗░████║██╔══██╗
░░░░░██║██║░░░██║██╔██╗██║██║██╔████╔██║██║░░██║
██╗░░██║██║░░░██║██║╚████║██║██║╚██╔╝██║██║░░██║
╚█████╔╝╚██████╔╝██║░╚███║██║██║░╚═╝░██║╚█████╔╝
░╚════╝░░╚═════╝░╚═╝░░╚══╝╚═╝╚═╝░░░░░╚═╝░╚════╝░
This little Junimo helps collect your eggs while you explore Stardew Valley to repair the community center!
Based on the design of a real apple, this 3D-printable Junimo can be printed whole or in parts to be built by you. The eggs and arms are detachable and optional. So if chicken farming isn't your cup of tea, be sure to download and print the Body_only.stl' file.
At 100% scale, the model stands approximately 90mm tall and 65mm wide. Be sure to scale it up to your preferred size before printing. Any scaling below the original size is not recommended as the arms and leafstalk may become too thin to print nicely.
Comments and feedback are greatly appreciated and happy printing!
The leaf on the leafstalk is very thin, and so when printing or post-processing please be careful or it will break. Smoothing will acetone vapour may cause it to sag too.
I recommend using 15% infill on all parts except for the 'Body.stl' file, which I recommend printing at 20% infill. It does not matter very much, but I find that the top of the print comes out looking better.
| Date de publication | 28/03/2020 |
| Quantité de filament | 25 grams |
| Dimensions | 65 x 65 x 90 |