Storage box (explorers & pirates)
Storage box (explorers & pirates)
3D
Published 2017-06-20T19:46:15+00:00
This is the storage-solution for my explorers & pirates expansion: http://www.thingiverse.com/thing:1588996
To use this box you need to have printed the main game and the seafarers expansion allready. The box offers space for the following hex-pieces:
19 x water
1 x council
1 x wool
1 x wood
4 x gold
6 x spice
6 x fish
1 x ore
1 x counter-fish-victory-point
1 x counter-spice-victory-point
1 x counter-gold-victory-point
For the box you need to print the following parts:
2 x storage core (If you used self-adhesive-foil to cover the buttom of your tiles or anything that makes them thicker than the original files, print 2 x storage core big)
1 x storage part 2
1 x storage top
1 x storage center (If you used self-adhesive-foil to cover the buttom of your tiles or anything that makes them thicker than the original files, print storage center big)
1 x storage center top
1 x council (placeholder)
6 x spice (placeholder)
6 x fish (placeholder)
All the other placeholder-parts you find them here:
The biggest sices you need to print are 19.5 cm x 20.00 cm (7.67 x 7,87 inches). So make shure you're printerbed is big enough. For transporting the box, make sure that you grab it on the bottom, not the top...
Have fun :-)
Printer brand : Ultimaker
Printer : Ultimaker 2
Rafts : No
Supports : No
Resolution : 0.8 mm
Infill : medium
| Date de publication | 20/06/2017 |
| Technologie | FDM |
| Complexité | Medium |
| Sans support | YES |