Swatch / Mini test (YAST - yet another swatch test)
Swatch / Mini test (YAST - yet another swatch test)
3D
Published 2022-12-05T10:32:58+00:00
Looked for a swatch and small test that I didn't have to keep editing the model to match the material information. I didn't find one so I made one. I could have probably used one of the other ones, but I always want an excuse to use Fusion 360.
This is an FDM printer filament swatch that also acts as a small test for functionality. More info in the image or below. This is designed to use a 1in. x 1in. / 26mm x 26mm label for information about filament name and printing settings.
The dimensions of the swatch is modeled at 72mm x 34mm x 2mm with various areas with small functionality tests such as overhangs and layer height.
Note: I did have to glue the label to my TPU, but you may have better luck.
Test areas (locations tagged in the image).
1in. x 1in. / 26mm x 26mm label location.
Small bridge testing area with 5mm, 7mm, 10mm, 12mm, and 15mm areas.
Areas for testing sharp edges and a 45-degree overhang at the long edge.
Flat area for solid surface or customization area.
Text embossed test and layer height labels.
Layer height from 1 thru 5 layers.
Small circle test at 1mm, 2mm, 3mm, and 4mm diameter.
Thin wall and emboss test at 0.4mm, 0.6mm, 0.8mm, and 1.0mm.
| Date de publication | 05/12/2022 |
| Durée d’impression | 30 - minutes |
| Dimensions | 72mm x 64mm x 2mm |