Tomica Nissan Fairlady Z 2023 Display Base
Tomica Nissan Fairlady Z 2023 Display Base
3D
Published 2022-03-07T10:59:49+00:00
Description
====================
A base for Tomica Nissan Fairlady Z 2023, it will fit all Tomica basic release of the same casting. The one seen in my pictures has done a rim swap.
If you wish to have a display base tweaked to fit to a specific Nissan Z from a different brand, please send me these dimension for the display base holes: https://imgur.com/5T6mb2L
The display base is separated into 3 parts for easy printing and colour swap. The parts are:
1) Name plate
- NamePlateAssem.STL
2) Base
- BaseV2.STL
3) Base back wall:
- BoxBackAssem.STL
Print Settings
====================
Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "NamePlateAssem":
1) Start (Background colour, mine is in black)
2) Layer 9 ("Fairlady Z" lettering colour, mine was painted grey then coloured with chrome pen)
Filament change layer for colours on "BoxBackAssem":
1) Start (Background of "Z" wall, mine is in yellow)
2) Layer 6 (Nissan logo background and "Z" outerline, mine is in black)
3) Layer 11 (Nissan logo, split line and Z colour, mine is in grey)
Assembly
====================
The car is tied by wires through the hole in the base
Back plate and name plate should slide in nicely into the display base. The name plate will need some double sided tape to hold it nicely.
Others
====================
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
| Date de publication | 07/03/2022 |
| Sans support | YES |