TOON STYLE BEVERAGE MUG!
$2.25 TOON STYLE BEVERAGE MUG!
3D
Published 2022-06-13T09:32:21+00:00
***NOTE: Copyright PA1© - FOR FULL ACCESS TO ALL MY MODELS, + EXCLUSIVE STLs AND A COMMERCIAL LICENSE FOR SELLING YOUR PRINTS, YOU CAN JOIN MY PATREON HERE:***
https://www.patreon.com/PA1_MAKER
For the youngest kids or the older ones, Feel like a cartoon viking, with this mug with cartoonish outlines.
Oversized base, to prevent drinks from tipping over, great for the kids oudoor!!!
Easy to print, and 2 ways to print it:
-1: With supportS for the handle, at the bottom AND at the top horizontal section of the handle. (i recommend custom supports if you a re familiar with those)
OR
-2: With supports ONLY on the buildplate. You will have a few filaments dangling at the top, under the handle (see last photo on printer) but they are easy to remove with cutters. The inferior part of the top handle is not perfectly flat so the first bridges will be messy, but like i said really easy to remove. And you will save time with less supports.
Put at least 3 walls, with few infill (10% is way enough).
It is made for regular 355ml north american soda/beer cans.
You can scale it up or down like you want.
To help you do that, the Inside diameter is actually 68mm precisely X 114mm high (average).
With these measurements, you will be able to calculate the scale ratio for your beverage can if its different in size.
DO NOT POOR DRINK DIRECTLY INTO THE MUG
NOTE: FOR COMMERCIAL USE (SELLING YOUR PRINTS), YOU MUST JOIN MY PATREON, WHICH INCLUDES: FULL ACCESS TO ALL MY MODELS, EXCLUSIVE STLs AND COMMERCIAL LICENSE! JOIN MY PATREON HERE:
patreon.com/PA1_MAKER
| Date de publication | 13/06/2022 |
| Price | $2.25 |