Tree Sprite or Dryad
$5.00 Tree Sprite or Dryad
Published 2024-01-17T13:51:01+00:00
I had such an amazing time sculpting this little guy. I hope he can make your story or painting desk explode with life!
Some ideas on how to use this model:
- Twig Blight
- Dryad
- Ent
- Tree Spirit
- Plant Golem
Thank you!
- Bryan Parry
Portfolio:
https://bryan_parry.artstation.com/albums/10282786
Miniature comes supported and unsupported.
The 3D printer setup I use as of upload: 16 Jan, 2024
- Elegoo Saturn 3
- Elegoo Standard 8K Space Gray Resin
- Lychee Pro
Printer Settings:
Layer Height - 0.040 mm
Bottom Layer Count - 3
Exposure Time - 2.800 s
Bottom Exposure Time - 35.00 s
Transition Layer - Count 10
Transition Type - Linear
Waiting Mode During Printing - Resting Time
Rest Time Before Lift - 1.000 s
Rest Time After Lift - 1.250 s
Rest Time After Retract - 1.000 s
Bottom Lift Distance - 3.000 + 4.000 mm
Lifting Distance - 3.000 + 4.000 mm
Bottom Retract Distance - 5.500 + 1.500 mm
Retract Distance - 5.500 + 1.500 mm
Bottom Lift Speed - 65.000 & 180.000 mm/min
Lifting Speed - 65.000 & 180.000 mm/min
Bottom Retract Speed - 180.000 & 65.000 mm/min
Retract Speed - 180.000 & 65.000 mm/min
Date de publication | 17/01/2024 |
Price | $5.00 |
Sans support | YES |