TUBING PTFE CUTTER
TUBING PTFE CUTTER
3D
Published 2018-09-27T10:42:11+00:00
This object is a cutter used to cut the PTFE tube perfectly at 90° of the Bowden feeder in a perfectly straight way allowing a perfect adhesion inside the extruder.
For your assembly you need a traditional cutter blade, four 5 mm bolts and four 2.8 mm diameter screws, about 20 mm long, and in a few minutes you are ready to use this useful and safe tool.
These are the parameters for a perfect print PLA:
Top Solid Layers = 3
Bottom Solid Layer = 3
Outiline/Perimeter Shells = 3
Outiline Direction: Inside-Out
Temperature Extruder: 195/200°
Temperature Heted Bed: 60°
Printing speed 60 mm/s
If you have your own print profile by default, you only have to enter information about the layers.
| Date de publication | 27/09/2018 |
| Durée d’impression | 2 - 120 minutes |
| Quantité de filament | 35 |
| Dimensions | 100x20x25 |
| Sans support | YES |