Voxelab to Anycubic Wash Station Adaptor Bracket
Voxelab to Anycubic Wash Station Adaptor Bracket
3D
Published 2020-12-22T14:59:47+00:00
Simple bracket replacement to allow the build plate from Voxelab Proxima and Polaris Resin Printers to fit centrally in the Anycubic Wash/Cure station.
There are 2 versions - voxelabanycubicv4.stl has a 4mm thickness where the plate screw attaches. One or two people found this wasn't thick enough to allow the bed to be tightened (so I have also included voxelabanycubicv5-7mm.stl which increases this thickness to 7mm (this is approximately the same thickness of the printer head attachment bracket).
Please note that I have experienced no issues with the 4mm version so there may be some variance in the thread length or positioning of the ball head that changes the tightening tolerances.
Designed primarily for FDM printing and does not require supports. Should also print perfectly well using resin.
Example in the photos is printed using Sunlu PETG on a Wanhao Duplicator 6. .2 Layer Height, 5 walls/bottom top layers. 10% infill.
Print time includes a raft (makes PETG easier to remove from my glass bed).
| Date de publication | 22/12/2020 |
| Durée d’impression | 2 - 20 minutes |
| Quantité de filament | 9m/24 grams |
| Dimensions | 39mm x 75mm x 47mm |
| Sans support | YES |