Working model of the turbocharger
6,687
views
784
downloads
2
collections
Community Prints
Add your picture
Soyez le premier à partager une photo de l'impression de cet objet
7 comments
Loading comments... 
Working model of the turbocharger
3D
Published 2019-07-03T17:42:30+00:00
67
7
Add to Collection
Description
Neat Assembly provides a sample performance. For acceptable work requires a small run-in with a compressor or vacuum cleaner. Care must be taken when using the compressor, and dynamic injuries may occur due to the destruction of the impellers if excessive pressure is applied.
Détail de l'impression
The diameter of the bearing beds are increased to compensate for the shrinkage of the print by 0.3 mm. The impeller Holes require drilling by 3 mm. The dimensions Of the bearings are 7x3x3 = 2 PCs. Has a bolt head in flush М3х10 = 6 PCs, М6х20=12 PCs. As the axis used roller 3~40 mm needle bearing. Between the impeller and the bearing strip thickness 0,2 - 0,4 mm
Technical Information
| Date de publication | 03/07/2019 |
More Information
Object Parts