Zou Octopus
$4.00 Zou Octopus
3D
Published 2024-03-30T15:46:39+00:00
Zou Octopus
Print settings - (Read the tips)
To print you must be aware of some tips!
Print the file "Zou_Octopus_TEST.stl", to test if your printer is calibrated to print this model!
Print the file "Zou_Octopus_TEST.stl", to test if your printer is calibrated to print this model!
Be careful when taking the model off the print bed!
Be very careful when taking the model out of the print bed to make sure the tentacle suction cups don't break! Using a flexible bed makes everything easier!
Beware of filaments with moisture! Filaments with moisture are very fragile and can prevent you from successfully printing this model.
Calibrate your z-Offset and the temperature of your printing material so that the tentacle suckers do not stick together.
Wall line count: 4
Infill(Gyroid): 20% or more
Print the file "Zou_Octopus_TEST.stl", to test if your printer is calibrated to print this model!
| Date de publication | 30/03/2024 |
| Price | $4.00 |
| Sans support | YES |