Gothic Sector : Templaris
Created by FabricatorsLair
Gothic Sector : Templaris is a complete modular scenery for wargame. It includes : -A modular ground system, with heights and ramps -A modular building system -Multiple sets of easy-to-build buildings -Accessories to add details to the scenery -Bases to match the miniatures with the scenery You can see more pictures and 3D render on the Kickstarter page here : https://www.kickstarter.com/projects/fabricatorslair/gothic-sector-templaris The whole project has been designed to be compatible with FDM and Resin/SLA printer. It includes pre-supported files for SLA/Resin printer. Terrain and buildings can be assembled without glue, just by using connectors or magnet, so you can assemble and disassemble as much as you want to build different buildings/terrain with the same set of pieces.
Gothic Sector : Templaris
Created by FabricatorsLair- Pledges (5)
- Add-ons (0)
Pledges
1971 backers
USD 40.00
Gothic Sector : Templaris - Terrain Accessories for Wargame
A complete set of accessories for your wargame terrain.
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-11 barrels (including damaged variations)
-4 Barricades (including damaged variations)
-3 Containers (including damaged variations)
-2 Crates wit damaged variation
-1 Pallet
-5 Stack of debris
-2 Statue undamaged
-4 parts of destroyed statues
-6 Street lamps (including damaged variations)
Compatibile with SLA and FDM printer
All parts are presupported for SLA printer.
Sci-Fi Scenic Base with curved walls
Scenic base with 9 curved walls and 5 ground style. Included in my two late pledge campaign :
https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Every ground style is supplied with 40mm/32mm/28m/25mm bases.
Each part are pre-supported
Gothic Ruins Set #1 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There is 14 parts that allow you to build
-1x two story building
-3x one story building
-8x ruins
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : I recommend to print directly on the build plate (hollow version), but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Gothic Ruins Set #3 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There are 22 parts that allow you to build
-a big church composed of 4 parts (Front West/Front East/Rear West/Rear East)
-4x one story building (made from the 4 parts of the Cathedral, using the alternative Level1)
-6x ruins (When using the levels 1 alone)
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : You can print directly on the build plate (hollow version) if you have correctly calibrated the Bottom Tolerance, but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Gothic Ruins Set #2 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There is 23 parts that allow you to build
-1x two story building
-2x one story building
-2x two story tower
-2x one story tower
-2x destroyed bridge
-1x ruin
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : You can print directly on the build plate (hollow version) if you have correctly calibrated the Bottom Tolerance, but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Gothic Sector : Templaris - Objective Markers for Wargame
A set of 6 objective markers for wargame.
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Compatible with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Sector : Templaris - Modular Terrain System
A complete modular terrain system that allow you to build terrain with ramps and height
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-4 styles of ground tiles (40 tiles for each style)
-20 Road tiles, with intersection and turn
-5 Ramps
-Pillars and walls to do height
There are 2 Assembly systems : with connector (pegs included) or with magnet
Compatibility with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Sector : Forge of Pavonis - Sample
A sample of the Gothic Sector : Forge of Pavonis Kickstarter Campaign. You can build destroyed buildings in a grimdark industrial style for your tabletop wargame scenery.
You can find the complete project on Kickstarter here :
https://www.kickstarter.com/projects/fabricatorslair/gothic-sector-forge-of-pavonis?ref=p8emm0
Assembling with connector or magnet (3x2mm and 5x2mm)
Compatible with FDM and Resin printer
Files are pre-supported for Resin printer.
Gothic Sector : Templaris - Modular Building System
A complete modular building system that allow you to build small ruins to big buildings like cathedral (and bigger)
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-Pillars and destroyed pillars
-Wall, damaged and destroyed walls
-Floor tiles, Damaged and destroyed floor tiles
-Archs
-Building accesories like lamp or ornament
There are 2 Assembly systems ; with connector (pegs included) or with magnet (Magnet needed : 3mm diameter and 2mm thickness for wall/pillar/floor tiles and 5x2mm between pillars)
Compatibility with SLA and FDM printer
All parts are presupported for SLA printer and some parts are supplied with kind of support for FDM printer.
450 ROUND AND OVALE SCI-FI BASES 17 SIZES
450 round and ovale Sci-Fi bases from the Gothic Sector : Templaris project. 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Templaris project : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Round :
25mm : 80 models
28,5mm : 80 models
32mm : 61 models
40mm : 37 models
50mm : 37 models
60mm : 19 models
80mm : 12 models
90mm : 10 models
100mm : 7 models
130mm : 5 models
160mm : 3 models
Ovale
60x35mm : 37 models
75x42mm : 24 models
90x52mm : 19 models
105x70mm : 10 models
120x92mm : 7 models
170x105mm : 4 models
The complete project is available here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
All STL Files (1100+) + unlocked stretch goals. Personal use only. It includes : -Modular building system (Pillars, wall, floor tiles, etc....) -Sets of easy-to-build buildings -Modular terrain system (Ground tiles, ramps, wall and pillars) -Accessories (barrel, crate, street lamps, statues, etc...) -Bases (round, ovale and scenic)
159 backers
USD 66.00
Gothic Sector : Templaris - Terrain Accessories for Wargame
A complete set of accessories for your wargame terrain.
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-11 barrels (including damaged variations)
-4 Barricades (including damaged variations)
-3 Containers (including damaged variations)
-2 Crates wit damaged variation
-1 Pallet
-5 Stack of debris
-2 Statue undamaged
-4 parts of destroyed statues
-6 Street lamps (including damaged variations)
Compatibile with SLA and FDM printer
All parts are presupported for SLA printer.
Sci-Fi Scenic Base with curved walls
Scenic base with 9 curved walls and 5 ground style. Included in my two late pledge campaign :
https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Every ground style is supplied with 40mm/32mm/28m/25mm bases.
Each part are pre-supported
Gothic Sector : Templaris - Objective Markers for Wargame
A set of 6 objective markers for wargame.
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Compatible with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Sector : Templaris - Modular Terrain System
A complete modular terrain system that allow you to build terrain with ramps and height
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-4 styles of ground tiles (40 tiles for each style)
-20 Road tiles, with intersection and turn
-5 Ramps
-Pillars and walls to do height
There are 2 Assembly systems : with connector (pegs included) or with magnet
Compatibility with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Sector : Templaris - Modular Building System
A complete modular building system that allow you to build small ruins to big buildings like cathedral (and bigger)
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-Pillars and destroyed pillars
-Wall, damaged and destroyed walls
-Floor tiles, Damaged and destroyed floor tiles
-Archs
-Building accesories like lamp or ornament
There are 2 Assembly systems ; with connector (pegs included) or with magnet (Magnet needed : 3mm diameter and 2mm thickness for wall/pillar/floor tiles and 5x2mm between pillars)
Compatibility with SLA and FDM printer
All parts are presupported for SLA printer and some parts are supplied with kind of support for FDM printer.
450 ROUND AND OVALE SCI-FI BASES 17 SIZES
450 round and ovale Sci-Fi bases from the Gothic Sector : Templaris project. 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Templaris project : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Round :
25mm : 80 models
28,5mm : 80 models
32mm : 61 models
40mm : 37 models
50mm : 37 models
60mm : 19 models
80mm : 12 models
90mm : 10 models
100mm : 7 models
130mm : 5 models
160mm : 3 models
Ovale
60x35mm : 37 models
75x42mm : 24 models
90x52mm : 19 models
105x70mm : 10 models
120x92mm : 7 models
170x105mm : 4 models
The complete project is available here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Gothic Ruins Set #1 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There is 14 parts that allow you to build
-1x two story building
-3x one story building
-8x ruins
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : I recommend to print directly on the build plate (hollow version), but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Hiveship - 248 ROUND AND OVALE SCI-FI BASES 17 SIZES
248 round and ovale Sci-Fi bases in the Hiveship style from the Gothic Sector : Lost Ships project. There is 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Lost Ships project : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
Round :
25mm : 44 models
28,5mm : 44 models
32mm : 37 models
40mm : 19 models
50mm : 19 models
60mm : 12 models
80mm : 7 models
90mm : 7 models
100mm : 3 models
130mm : 3 models
160mm : 2 models
Ovale
60x35mm : 19 models
75x42mm : 10 models
90x52mm : 7 models
105x70mm : 7 models
120x92mm : 4 models
170x105mm : 4 models
Tombship - 248 ROUND AND OVALE SCI-FI BASES 17 SIZES
248 round and ovale Sci-Fi bases in the Tombship style from the Gothic Sector : Lost Ships project. There is 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Lost Ships project : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
Round :
25mm : 44 models
28,5mm : 44 models
32mm : 37 models
40mm : 19 models
50mm : 19 models
60mm : 12 models
80mm : 7 models
90mm : 7 models
100mm : 3 models
130mm : 3 models
160mm : 2 models
Ovale
60x35mm : 19 models
75x42mm : 10 models
90x52mm : 7 models
105x70mm : 7 models
120x92mm : 4 models
170x105mm : 4 models
Gothic Navy Spaceship - 248 ROUND AND OVALE SCI-FI BASES 17 SIZES
248 round and ovale Sci-Fi bases in the Gohtic Navy Spaceship style from the Gothic Sector : Lost Ships project. There is 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Lost Ships project : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
Round :
25mm : 44 models
28,5mm : 44 models
32mm : 37 models
40mm : 19 models
50mm : 19 models
60mm : 12 models
80mm : 7 models
90mm : 7 models
100mm : 3 models
130mm : 3 models
160mm : 2 models
Ovale
60x35mm : 19 models
75x42mm : 10 models
90x52mm : 7 models
105x70mm : 7 models
120x92mm : 4 models
170x105mm : 4 models
Gothic Sector Lost Ships - Bonus Parts
Some additionnal part for the Gothic Sector Lost Ships project:
-Conveyor Belt Tile (straight, Turn Left, Turn Right)
-Temporary Barrier wall, with removable beam
-Boarding Pod Tile
-Docking Umbilical Tile
Gothic Ruins Set #3 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There are 22 parts that allow you to build
-a big church composed of 4 parts (Front West/Front East/Rear West/Rear East)
-4x one story building (made from the 4 parts of the Cathedral, using the alternative Level1)
-6x ruins (When using the levels 1 alone)
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : You can print directly on the build plate (hollow version) if you have correctly calibrated the Bottom Tolerance, but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Greater Good Spaceship- A boarding action terrain
Greater Good Spaceship is a complete set of STL files to print everything you need to build the interior of a Greater Good spaceship for boarding action or kill team game. It's a part of the Gothic Sector : Lost Ships project (available on MMF here), a collection of terrain for Kill Team and Boarding action.
Every part are designed to be printed with Resin or FDM printer.
It includes :
-5x Door models
-18x Wall models
-2x Broken wall models
-5x Pillar models
-4x Cap models
-26x Apparatus & Accessories models
It also includes additionnal features :
-Ground Tiles, with a version compatible with backlight
-Catwalk System
-Large Hangar door
-Windows
There is 2 connection systems :
-with connector, compatible with plastic kit
-with magnet, diameter 3mm, 2mm height
Gothic Navy Spaceship - A boarding action terrain
Gothic Navy Spaceship is a complete set of STL files to print everything you need to build the interior of a Gothic Human spaceship for boarding action or kill team game. It's a part of the Gothic Sector : Lost Ships project (available on MMF here), a collection of 4 spaceships for Kill Team and Boarding action.
Every part are designed to be printed with Resin or FDM printer.
It includes :
-5x Door models
-18x Wall models
-2x Broken wall models
-5x Pillar models
-4x Cap models
-26x Apparatus & Accessories models
It also includes additionnal features :
-Ground Tiles, with a version compatible with backlight
-Catwalk System
-Large Hangar door
-Windows
There is 2 connection systems :
-with connector, compatible with plastic kit
-with magnet, diameter 3mm, 2mm height
Greater Good Spaceship - 248 ROUND AND OVALE SCI-FI BASES 17 SIZES
248 round and ovale Sci-Fi bases in the Greater Good Spaceship style from the Gothic Sector : Lost Ships project. There is 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Lost Ships project : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
Round :
25mm : 44 models
28,5mm : 44 models
32mm : 37 models
40mm : 19 models
50mm : 19 models
60mm : 12 models
80mm : 7 models
90mm : 7 models
100mm : 3 models
130mm : 3 models
160mm : 2 models
Ovale
60x35mm : 19 models
75x42mm : 10 models
90x52mm : 7 models
105x70mm : 7 models
120x92mm : 4 models
170x105mm : 4 models
Tombship - A boarding action terrain
Tombship is a complete set of STL files to print everything you need to build the interior of a Tombship for boarding action or kill team game. It's a part of the Gothic Sector : Lost Ships project (available on MMF here), a collection of terrain for Kill Team and Boarding action.
Every part are designed to be printed with Resin or FDM printer.
It includes :
-5x Door models
-18x Wall models
-2x Broken wall models
-5x Pillar models
-4x Cap models
-20x Apparatus & Accessories models
It also includes additionnal features :
-Ground Tiles, with a version compatible with backlight
-Catwalk System
-Large Hangar door
-Windows
There is 2 connection systems :
-with connector, compatible with plastic kit
-with magnet, diameter 3mm, 2mm height
Transition parts between spaceships
Ground tiles and walls to do transition between different spaceship style
Hive Ship - A boarding action terrain
Hiveship is a complete set of STL files to print everything you need to build the interior of a Greater Good spaceship for boarding action or kill team game. It's a part of the Gothic Sector : Lost Ships project (available on MMF here), a collection of terrain for Kill Team and Boarding action.
Every part are designed to be printed with Resin or FDM printer.
It includes :
-6x Door models (including 2 infested gothic doors)
-19x Wall models (including 6 infested gothic walls)
-2x Broken wall models
-6x Pillar models (including 2 infested gothic pillars)
-6x Cap models (including 2 infested gothic pillars)
-26x Apparatus & Accessories models
It also includes additionnal features :
-21x Ground Tiles, with a version compatible with backlight (including 6 infested gothic ground tiles)
-Catwalk System
-Windows
There is 2 connection systems :
-with connector, compatible with plastic kit
-with magnet, diameter 3mm, 2mm height
Gothic Ruins Set #2 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There is 23 parts that allow you to build
-1x two story building
-2x one story building
-2x two story tower
-2x one story tower
-2x destroyed bridge
-1x ruin
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : You can print directly on the build plate (hollow version) if you have correctly calibrated the Bottom Tolerance, but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Gothic Sector : Forge of Pavonis - Sample
A sample of the Gothic Sector : Forge of Pavonis Kickstarter Campaign. You can build destroyed buildings in a grimdark industrial style for your tabletop wargame scenery.
You can find the complete project on Kickstarter here :
https://www.kickstarter.com/projects/fabricatorslair/gothic-sector-forge-of-pavonis?ref=p8emm0
Assembling with connector or magnet (3x2mm and 5x2mm)
Compatible with FDM and Resin printer
Files are pre-supported for Resin printer.
A combo of my 2 projects, for personnal use only : Gothic Sector : Lost Ships - Complete STL pack More details here : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788 Gothic Sector : Templaris - Complete STL pack All STL Files (1100+) + unlocked stretch goals. Personal use only. It includes : -Modular building system (Pillars, wall, floor tiles, etc....) -Sets of easy-to-build buildings -Modular terrain system (Ground tiles, ramps, wall and pillars) -Accessories (barrel, crate, street lamps, statues, etc...) -Bases (round, ovale and scenic)
13 backers
USD 78.00
Grimdark Industrial Ruins Set #4
An amazing set of industrial ruins from the Gothic Sector Forge of Pavonis campaign (available here https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603 )
There is 9 parts that allow you to build
-1x two storey factory
-3x one story building
-3x ruins
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place or support are included
For SLA printer : pre-supported version supplied
Some floor are splitted in two parts (or more), expecially for SLA printer and need to be glued. The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Modular Ground System - Grimdark Industrial
A complete modular terrain system that allow you to build terrain with ramps and height
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : kickstarter.com/projects/fabricatorslair/gothic-sector-forge-of-pavonis
It includes :
-3 styles of ground tiles (20 tiles for each style)
-12 Road tiles, with intersection and turn
-5 Ramps
-4 Pillars and 15 walls to do height
Assembling is done with connector
Compatibilite with SLA and FDM printer
All parts are presupported for SLA printer.
Modular Industrial Walkway - Grimdark Industrial
A set of modular industrial walkway for wargame.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
You can use this set with my Modular Pipes and my Modular Tanks & Chimney to assemble industrial structures.
Assembling is done using connector
It includes:
-14 walkway tiles
-8 pillars (3 sizes)
-1 stair
-4 barricades
-2 cables
-6 ladders (3 sizes)
Compatible with SLA and FDM printer
All parts are presupported for SLA printer and print-in-place (or support included) for FDM
Modular Tanks & Chimney - Grimdark Industrial
A set of modular tanks and chimney for wargame.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
You can use this set with my Modular Pipes and my Modular Industrial Walkway to assemble industrial structures.
Assembling can be done using connector or magnets (3mm diameter x 2mm width and 5mm diameter x 2mm width)
It includes:
-6 big tanks body
-2 big tanks damaged
-5 big plasma tanks body compatible with backlight
-3 big tanks cover
-2 big tanks support
-8 medium tanks body
-2 medium tanks damaged
-5 medium plasma tanks body compatible with backlight
-3 medium tanks cover
-3 medium tanks support
-6 sphere tanks body
-1 sphere tank damaged
-6 sphere plasma tanks body compatible with backlight
-5 chimney with large base
-5 chimney with medium base
-6 chimney top
Some parts can be backlighted using 1m LED strip with CR2032 Battery (for medium tanks), 2m LED strip with CR2032 Battery/LED Coasters/Waterproof LED (For Big and Sphere Tanks). For better results with backlight, print the parts in white (filament or resin) instead of clear.
Compatible with SLA and FDM printer
All parts are presupported for SLA printer and print-in-place (or support included) for FDM
Grimdark Industrial Ruins Set #3
An amazing set of industrial ruins from the Gothic Sector Forge of Pavonis campaign (available here https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603 )
There is 21 parts that allow you to build
-1x two storey factory, composed of 2 parts (front and rear)
-5x one story building
-4x ruins
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place or support are included
For SLA printer : pre-supported version supplied
Some floor are splitted in two parts (or more), expecially for SLA printer and need to be glued. The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Grimdark Industrial Ruins Set #2
An amazing set of industrial ruins from the Gothic Sector Forge of Pavonis campaign (available here https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603).
There is 14 parts that allow you to build
-1x two storey building
-4x one story building
-2x ruins
-2x tanks
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place or support are included
For SLA printer : pre-supported version supplied
Some floor are splitted in two parts (or more), expecially for SLA printer and need to be glued. The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Grimdark Industrial Ruins Set #1
An amazing set of industrial ruins from the Gothic Sector Forge of Pavonis campaign (available here https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603 ).
There is 15 parts that allow you to build
-2x two storey building
-4x one story building
-5x ruins
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place or support are included
For SLA printer : pre-supported version supplied
Some floor are splitted in two parts (or more), expecially for SLA printer and need to be glued. The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Modular Rubble Pile
A set of modular rubble pile for wargame.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
Assembling can be done using connector
It includes:
-3 rubble piles
-3 rubble piles that can be put alongside buildings of my projects (easy-to-build and modular)
-1 angle out
-1 angle out that can be put alongside buildings of my projects (easy-to-build and modular)
-1 angle in that can be put alongside buildings of my projects (easy-to-build and modular)
Compatible with SLA and FDM printer
All parts are presupported for SLA printer and print-in-place for FDM
Plasma Processing Machine - Gimdark Industrial
A set of Industral Machinery for wargame.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
It includes 4 buildings that can be backlighted using LED strip with CR2032 Battery :
-Plasma Auxiliary Generator
-Plasma Condensator
-Plasma Generator
-Plasma Turbine
and 4 alternatives that cannot be backlighted
-Auxiliary Generator
-Condensator
-Generator
-Turbine
For better results with backlight, print the parts in white (filament or resin) instead of clear.
Compatible with SLA and FDM printer
All parts are presupported for SLA printer and print-in-place for FDM
Modular Building System - Grimdark Industrial
A complete modular building system that allow you to build small ruins to big buildings like factory (and bigger)
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : kickstarter.com/projects/fabricatorslair/gothic-sector-forge-of-pavonis
It includes :
-Pillars and destroyed pillars
-Wall, damaged and destroyed walls
-Floor tiles, Damaged and destroyed floor tiles
-Archs
There are 2 Assembly systems ; with connector (pegs included) or with magnet (Magnet needed : 3mm diameter and 2mm thickness for wall/pillar/floor tiles and 5x2mm between pillars)
Compatibility with SLA and FDM printer
All parts are presupported for SLA printer and some parts are supplied with kind of support for FDM printer.
Modular pipes - Grimdark industrial
A set of modular pipes for wargame.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
You can use this set with my Modular Tanks & Chimney and my Modular Industrial Walkway to assemble industrial structures.
Assembling can be done using connector or magnets (3mm diameter x 2mm width)
It includes:
-21 pipes sections
-5 double length pipes sections
-2 T pipes
-1 X pipe
-2 Turn pipes
-4 End pipes
-2 compressor
-3 regulator
-1 pipe support
Compatible with SLA and FDM printer
All parts are presupported for SLA printer and print-in-place for FDM
Industrial Machinery - Grimdark Industrial
A set of Industral machinery for wargame.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
It includes :
-Crane (modular height)
-Alternator
-Hammer Drill
-Pumpjack
Compatible with SLA and FDM printer
All parts are presupported for SLA printer and print-in-place for FDM
Battlemat - Pavonis Mons
A 44x60 inch battlemat you can print or make print by a professionnal.
A discount code to order a printed version on https://www.torek.fr is included (EU customers only)
450 ROUND AND OVALE SCI-FI BASES 17 SIZES - Grimdark Industrial
450 round and ovale Sci-Fi bases, 17 sizes.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
All bases are presupported for SLA.
Also compatible with FDM printer.
The toppers only are also supplied but not pre-supported.
Round :
25mm : 80 models
28,5mm : 80 models
32mm : 61 models
40mm : 37 models
50mm : 37 models
60mm : 19 models
80mm : 12 models
90mm : 10 models
100mm : 7 models
130mm : 5 models
160mm : 3 models
Ovale
60x35mm : 37 models
75x42mm : 24 models
90x52mm : 19 models
105x70mm : 10 models
120x92mm : 7 models
170x105mm : 4 models
Terrain accessories for wargame - Grimdark Industrial
A complete set of accessories for your wargame terrain.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
It includes :
-8 barrels (including damaged variations)
-3 Barricades (including damaged variations)
-2 Containers
-3 Crates
-4 supplies
Compatibile with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Ruins Set #3 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There are 22 parts that allow you to build
-a big church composed of 4 parts (Front West/Front East/Rear West/Rear East)
-4x one story building (made from the 4 parts of the Cathedral, using the alternative Level1)
-6x ruins (When using the levels 1 alone)
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : You can print directly on the build plate (hollow version) if you have correctly calibrated the Bottom Tolerance, but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Gothic Ruins Set #2 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There is 23 parts that allow you to build
-1x two story building
-2x one story building
-2x two story tower
-2x one story tower
-2x destroyed bridge
-1x ruin
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : You can print directly on the build plate (hollow version) if you have correctly calibrated the Bottom Tolerance, but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Gothic Ruins Set #1 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There is 14 parts that allow you to build
-1x two story building
-3x one story building
-8x ruins
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : I recommend to print directly on the build plate (hollow version), but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Gothic Sector : Templaris - Objective Markers for Wargame
A set of 6 objective markers for wargame.
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Compatible with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Sector : Templaris - Terrain Accessories for Wargame
A complete set of accessories for your wargame terrain.
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-11 barrels (including damaged variations)
-4 Barricades (including damaged variations)
-3 Containers (including damaged variations)
-2 Crates wit damaged variation
-1 Pallet
-5 Stack of debris
-2 Statue undamaged
-4 parts of destroyed statues
-6 Street lamps (including damaged variations)
Compatibile with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Sector : Templaris - Modular Terrain System
A complete modular terrain system that allow you to build terrain with ramps and height
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-4 styles of ground tiles (40 tiles for each style)
-20 Road tiles, with intersection and turn
-5 Ramps
-Pillars and walls to do height
There are 2 Assembly systems : with connector (pegs included) or with magnet
Compatibility with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Sector : Templaris - Modular Building System
A complete modular building system that allow you to build small ruins to big buildings like cathedral (and bigger)
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-Pillars and destroyed pillars
-Wall, damaged and destroyed walls
-Floor tiles, Damaged and destroyed floor tiles
-Archs
-Building accesories like lamp or ornament
There are 2 Assembly systems ; with connector (pegs included) or with magnet (Magnet needed : 3mm diameter and 2mm thickness for wall/pillar/floor tiles and 5x2mm between pillars)
Compatibility with SLA and FDM printer
All parts are presupported for SLA printer and some parts are supplied with kind of support for FDM printer.
Sci-Fi Scenic Base with curved walls
Scenic base with 9 curved walls and 5 ground style. Included in my two late pledge campaign :
https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Every ground style is supplied with 40mm/32mm/28m/25mm bases.
Each part are pre-supported
450 ROUND AND OVALE SCI-FI BASES 17 SIZES
450 round and ovale Sci-Fi bases from the Gothic Sector : Templaris project. 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Templaris project : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Round :
25mm : 80 models
28,5mm : 80 models
32mm : 61 models
40mm : 37 models
50mm : 37 models
60mm : 19 models
80mm : 12 models
90mm : 10 models
100mm : 7 models
130mm : 5 models
160mm : 3 models
Ovale
60x35mm : 37 models
75x42mm : 24 models
90x52mm : 19 models
105x70mm : 10 models
120x92mm : 7 models
170x105mm : 4 models
The complete project is available here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
A pack of my 2 projects, for personnal use only : Gothic Sector : Forge of Pavonis - Complete STL pack More details here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603 Gothic Sector : Templaris - Complete STL pack All STL Files (1100+) + unlocked stretch goals. Personal use only. It includes : -Modular building system (Pillars, wall, floor tiles, etc....) -Sets of easy-to-build buildings -Modular terrain system (Ground tiles, ramps, wall and pillars) -Accessories (barrel, crate, street lamps, statues, etc...) -Bases (round, ovale and scenic)
3 backers
USD 125.00
Grimdark Industrial Ruins Set #4
An amazing set of industrial ruins from the Gothic Sector Forge of Pavonis campaign (available here https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603 )
There is 9 parts that allow you to build
-1x two storey factory
-3x one story building
-3x ruins
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place or support are included
For SLA printer : pre-supported version supplied
Some floor are splitted in two parts (or more), expecially for SLA printer and need to be glued. The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Modular Ground System - Grimdark Industrial
A complete modular terrain system that allow you to build terrain with ramps and height
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : kickstarter.com/projects/fabricatorslair/gothic-sector-forge-of-pavonis
It includes :
-3 styles of ground tiles (20 tiles for each style)
-12 Road tiles, with intersection and turn
-5 Ramps
-4 Pillars and 15 walls to do height
Assembling is done with connector
Compatibilite with SLA and FDM printer
All parts are presupported for SLA printer.
Modular Industrial Walkway - Grimdark Industrial
A set of modular industrial walkway for wargame.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
You can use this set with my Modular Pipes and my Modular Tanks & Chimney to assemble industrial structures.
Assembling is done using connector
It includes:
-14 walkway tiles
-8 pillars (3 sizes)
-1 stair
-4 barricades
-2 cables
-6 ladders (3 sizes)
Compatible with SLA and FDM printer
All parts are presupported for SLA printer and print-in-place (or support included) for FDM
Modular Tanks & Chimney - Grimdark Industrial
A set of modular tanks and chimney for wargame.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
You can use this set with my Modular Pipes and my Modular Industrial Walkway to assemble industrial structures.
Assembling can be done using connector or magnets (3mm diameter x 2mm width and 5mm diameter x 2mm width)
It includes:
-6 big tanks body
-2 big tanks damaged
-5 big plasma tanks body compatible with backlight
-3 big tanks cover
-2 big tanks support
-8 medium tanks body
-2 medium tanks damaged
-5 medium plasma tanks body compatible with backlight
-3 medium tanks cover
-3 medium tanks support
-6 sphere tanks body
-1 sphere tank damaged
-6 sphere plasma tanks body compatible with backlight
-5 chimney with large base
-5 chimney with medium base
-6 chimney top
Some parts can be backlighted using 1m LED strip with CR2032 Battery (for medium tanks), 2m LED strip with CR2032 Battery/LED Coasters/Waterproof LED (For Big and Sphere Tanks). For better results with backlight, print the parts in white (filament or resin) instead of clear.
Compatible with SLA and FDM printer
All parts are presupported for SLA printer and print-in-place (or support included) for FDM
Grimdark Industrial Ruins Set #3
An amazing set of industrial ruins from the Gothic Sector Forge of Pavonis campaign (available here https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603 )
There is 21 parts that allow you to build
-1x two storey factory, composed of 2 parts (front and rear)
-5x one story building
-4x ruins
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place or support are included
For SLA printer : pre-supported version supplied
Some floor are splitted in two parts (or more), expecially for SLA printer and need to be glued. The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Grimdark Industrial Ruins Set #2
An amazing set of industrial ruins from the Gothic Sector Forge of Pavonis campaign (available here https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603).
There is 14 parts that allow you to build
-1x two storey building
-4x one story building
-2x ruins
-2x tanks
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place or support are included
For SLA printer : pre-supported version supplied
Some floor are splitted in two parts (or more), expecially for SLA printer and need to be glued. The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Grimdark Industrial Ruins Set #1
An amazing set of industrial ruins from the Gothic Sector Forge of Pavonis campaign (available here https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603 ).
There is 15 parts that allow you to build
-2x two storey building
-4x one story building
-5x ruins
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place or support are included
For SLA printer : pre-supported version supplied
Some floor are splitted in two parts (or more), expecially for SLA printer and need to be glued. The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Modular Rubble Pile
A set of modular rubble pile for wargame.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
Assembling can be done using connector
It includes:
-3 rubble piles
-3 rubble piles that can be put alongside buildings of my projects (easy-to-build and modular)
-1 angle out
-1 angle out that can be put alongside buildings of my projects (easy-to-build and modular)
-1 angle in that can be put alongside buildings of my projects (easy-to-build and modular)
Compatible with SLA and FDM printer
All parts are presupported for SLA printer and print-in-place for FDM
Plasma Processing Machine - Gimdark Industrial
A set of Industral Machinery for wargame.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
It includes 4 buildings that can be backlighted using LED strip with CR2032 Battery :
-Plasma Auxiliary Generator
-Plasma Condensator
-Plasma Generator
-Plasma Turbine
and 4 alternatives that cannot be backlighted
-Auxiliary Generator
-Condensator
-Generator
-Turbine
For better results with backlight, print the parts in white (filament or resin) instead of clear.
Compatible with SLA and FDM printer
All parts are presupported for SLA printer and print-in-place for FDM
Modular Building System - Grimdark Industrial
A complete modular building system that allow you to build small ruins to big buildings like factory (and bigger)
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : kickstarter.com/projects/fabricatorslair/gothic-sector-forge-of-pavonis
It includes :
-Pillars and destroyed pillars
-Wall, damaged and destroyed walls
-Floor tiles, Damaged and destroyed floor tiles
-Archs
There are 2 Assembly systems ; with connector (pegs included) or with magnet (Magnet needed : 3mm diameter and 2mm thickness for wall/pillar/floor tiles and 5x2mm between pillars)
Compatibility with SLA and FDM printer
All parts are presupported for SLA printer and some parts are supplied with kind of support for FDM printer.
Modular pipes - Grimdark industrial
A set of modular pipes for wargame.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
You can use this set with my Modular Tanks & Chimney and my Modular Industrial Walkway to assemble industrial structures.
Assembling can be done using connector or magnets (3mm diameter x 2mm width)
It includes:
-21 pipes sections
-5 double length pipes sections
-2 T pipes
-1 X pipe
-2 Turn pipes
-4 End pipes
-2 compressor
-3 regulator
-1 pipe support
Compatible with SLA and FDM printer
All parts are presupported for SLA printer and print-in-place for FDM
Industrial Machinery - Grimdark Industrial
A set of Industral machinery for wargame.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
It includes :
-Crane (modular height)
-Alternator
-Hammer Drill
-Pumpjack
Compatible with SLA and FDM printer
All parts are presupported for SLA printer and print-in-place for FDM
Battlemat - Pavonis Mons
A 44x60 inch battlemat you can print or make print by a professionnal.
A discount code to order a printed version on https://www.torek.fr is included (EU customers only)
450 ROUND AND OVALE SCI-FI BASES 17 SIZES - Grimdark Industrial
450 round and ovale Sci-Fi bases, 17 sizes.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
All bases are presupported for SLA.
Also compatible with FDM printer.
The toppers only are also supplied but not pre-supported.
Round :
25mm : 80 models
28,5mm : 80 models
32mm : 61 models
40mm : 37 models
50mm : 37 models
60mm : 19 models
80mm : 12 models
90mm : 10 models
100mm : 7 models
130mm : 5 models
160mm : 3 models
Ovale
60x35mm : 37 models
75x42mm : 24 models
90x52mm : 19 models
105x70mm : 10 models
120x92mm : 7 models
170x105mm : 4 models
Terrain accessories for wargame - Grimdark Industrial
A complete set of accessories for your wargame terrain.
It's a part of the Gothic Sector : Forge of Pavonis campaign you can find here : https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603
It includes :
-8 barrels (including damaged variations)
-3 Barricades (including damaged variations)
-2 Containers
-3 Crates
-4 supplies
Compatibile with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Ruins Set #3 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There are 22 parts that allow you to build
-a big church composed of 4 parts (Front West/Front East/Rear West/Rear East)
-4x one story building (made from the 4 parts of the Cathedral, using the alternative Level1)
-6x ruins (When using the levels 1 alone)
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : You can print directly on the build plate (hollow version) if you have correctly calibrated the Bottom Tolerance, but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Gothic Ruins Set #2 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There is 23 parts that allow you to build
-1x two story building
-2x one story building
-2x two story tower
-2x one story tower
-2x destroyed bridge
-1x ruin
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : You can print directly on the build plate (hollow version) if you have correctly calibrated the Bottom Tolerance, but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Gothic Ruins Set #1 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There is 14 parts that allow you to build
-1x two story building
-3x one story building
-8x ruins
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : I recommend to print directly on the build plate (hollow version), but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Space Elves Worldship - 248 ROUND AND OVALE SCI-FI BASES 17 SIZES
248 round and ovale Sci-Fi bases in the Space Elves style from the Gothic Sector : Lost Ships Part 2 project.
There is 17 sizes
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Lost Ships Part 2 project : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-part-2-2248
Round :
25mm : 44 models
28,5mm : 44 models
32mm : 37 models
40mm : 19 models
50mm : 19 models
60mm : 12 models
80mm : 7 models
90mm : 7 models
100mm : 3 models
130mm : 3 models
160mm : 2 models
Ovale
60x35mm : 19 models
75x42mm : 10 models
90x52mm : 7 models
105x70mm : 7 models
120x92mm : 4 models
170x105mm : 4 models
Space Dwarf Mining Ship - 248 ROUND AND OVALE SCI-FI BASES 17 SIZES
248 round and ovale Sci-Fi bases in the Space Dwarf style from the Gothic Sector : Lost Ships Part 2 project.
There is 17 sizes
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Lost Ships Part 2 project : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-part-2-2248
Round :
25mm : 44 models
28,5mm : 44 models
32mm : 37 models
40mm : 19 models
50mm : 19 models
60mm : 12 models
80mm : 7 models
90mm : 7 models
100mm : 3 models
130mm : 3 models
160mm : 2 models
Ovale
60x35mm : 19 models
75x42mm : 10 models
90x52mm : 7 models
105x70mm : 7 models
120x92mm : 4 models
170x105mm : 4 models
Greenskin Kroozer - 248 ROUND AND OVALE SCI-FI BASES 17 SIZES
248 round and ovale Sci-Fi bases in the Greenskin style from the Gothic Sector : Lost Ships Part 2 project
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Lost Ships Part 2 project : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-part-2-2248
Round :
25mm : 44 models
28,5mm : 44 models
32mm : 37 models
40mm : 19 models
50mm : 19 models
60mm : 12 models
80mm : 7 models
90mm : 7 models
100mm : 3 models
130mm : 3 models
160mm : 2 models
Ovale
60x35mm : 19 models
75x42mm : 10 models
90x52mm : 7 models
105x70mm : 7 models
120x92mm : 4 models
170x105mm : 4 models
Space Elves Worldship - A boarding action terrain
Space Elves Worldship is a complete set of STL files to print everything you need to build the interior of a Space Elves spaceship for boarding action or kill team game. It's a part of the Gothic Sector : Lost Ships Part 2 project, a collection of terrain for Kill Team and Boarding action (available on MMF here).
Every part are designed to be printed with Resin or FDM printer.
It includes :
-5x Door models
-14x Wall models
-2x Broken wall models
-5x Pillar models
-5x Cap models
-26x Apparatus & Accessories models
-Ground Tiles, with a version compatible with backlight
There is 2 connection systems :
-Connector, compatible with plastic kit
-Magnet, diameter 3mm, 2mm height
Space Dwarf Mining Ship - A boarding action terrain
Space Dwarf Mining Ship is a complete set of STL files to print everything you need to build the interior of a Space Dwarf spacehip for boarding action or kill team game. It's a part of the Gothic Sector : Lost Ships Part 2 project, a collection of terrain for Kill Team and Boarding action (available on MMF here).
Every part are designed to be printed with Resin or FDM printer.
It includes :
-5x Door models
-14x Wall models
-2x Broken wall models
-5x Pillar models
-5x Cap models
-26x Apparatus & Accessories models
It also includes additionnal features :
-Ground Tiles, with a version compatible with backlight
-Catwalk System
There is 2 connection systems :
-Connector, compatible with plastic kit
-Magnet, diameter 3mm, 2mm height
Greenskin Kroozer - A boarding action terrain
Greenskin Kroozer is a complete set of STL files to print everything you need to build the interior of a Greenskin spacehip for boarding action or kill team game. It's a part of the Gothic Sector : Lost Ships Part 2 project, a collection of terrain for Kill Team and Boarding action (available on MMF here).
Every part are designed to be printed with Resin or FDM printer.
It includes :
-5x Door models
-14x Wall models
-2x Broken wall models
-5x Pillar models
-5x Cap models
-26x Apparatus & Accessories models
It also includes additionnal features :
-Ground Tiles, with a version compatible with backlight
-Catwalk System
There is 2 connection systems :
-Connector, compatible with plastic kit
-Magnet, diameter 3mm, 2mm height
Gothic Sector Lost Ships - Bonus Parts
Some additionnal part for the Gothic Sector Lost Ships project:
-Conveyor Belt Tile (straight, Turn Left, Turn Right)
-Temporary Barrier wall, with removable beam
-Boarding Pod Tile
-Docking Umbilical Tile
Transition parts between spaceships
Ground tiles and walls to do transition between different spaceship style
Gothic Sector : Templaris - Objective Markers for Wargame
A set of 6 objective markers for wargame.
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Compatible with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Sector : Templaris - Terrain Accessories for Wargame
A complete set of accessories for your wargame terrain.
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-11 barrels (including damaged variations)
-4 Barricades (including damaged variations)
-3 Containers (including damaged variations)
-2 Crates wit damaged variation
-1 Pallet
-5 Stack of debris
-2 Statue undamaged
-4 parts of destroyed statues
-6 Street lamps (including damaged variations)
Compatibile with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Sector : Templaris - Modular Terrain System
A complete modular terrain system that allow you to build terrain with ramps and height
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-4 styles of ground tiles (40 tiles for each style)
-20 Road tiles, with intersection and turn
-5 Ramps
-Pillars and walls to do height
There are 2 Assembly systems : with connector (pegs included) or with magnet
Compatibility with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Sector : Templaris - Modular Building System
A complete modular building system that allow you to build small ruins to big buildings like cathedral (and bigger)
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-Pillars and destroyed pillars
-Wall, damaged and destroyed walls
-Floor tiles, Damaged and destroyed floor tiles
-Archs
-Building accesories like lamp or ornament
There are 2 Assembly systems ; with connector (pegs included) or with magnet (Magnet needed : 3mm diameter and 2mm thickness for wall/pillar/floor tiles and 5x2mm between pillars)
Compatibility with SLA and FDM printer
All parts are presupported for SLA printer and some parts are supplied with kind of support for FDM printer.
Hiveship - 248 ROUND AND OVALE SCI-FI BASES 17 SIZES
248 round and ovale Sci-Fi bases in the Hiveship style from the Gothic Sector : Lost Ships project. There is 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Lost Ships project : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
Round :
25mm : 44 models
28,5mm : 44 models
32mm : 37 models
40mm : 19 models
50mm : 19 models
60mm : 12 models
80mm : 7 models
90mm : 7 models
100mm : 3 models
130mm : 3 models
160mm : 2 models
Ovale
60x35mm : 19 models
75x42mm : 10 models
90x52mm : 7 models
105x70mm : 7 models
120x92mm : 4 models
170x105mm : 4 models
Hive Ship - A boarding action terrain
Hiveship is a complete set of STL files to print everything you need to build the interior of a Greater Good spaceship for boarding action or kill team game. It's a part of the Gothic Sector : Lost Ships project (available on MMF here), a collection of terrain for Kill Team and Boarding action.
Every part are designed to be printed with Resin or FDM printer.
It includes :
-6x Door models (including 2 infested gothic doors)
-19x Wall models (including 6 infested gothic walls)
-2x Broken wall models
-6x Pillar models (including 2 infested gothic pillars)
-6x Cap models (including 2 infested gothic pillars)
-26x Apparatus & Accessories models
It also includes additionnal features :
-21x Ground Tiles, with a version compatible with backlight (including 6 infested gothic ground tiles)
-Catwalk System
-Windows
There is 2 connection systems :
-with connector, compatible with plastic kit
-with magnet, diameter 3mm, 2mm height
Sci-Fi Scenic Base with curved walls
Scenic base with 9 curved walls and 5 ground style. Included in my two late pledge campaign :
https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Every ground style is supplied with 40mm/32mm/28m/25mm bases.
Each part are pre-supported
Accessories for boarding action/KT terrain - Gothic Navy style
A set of 26 accessories in the Gothic Navy style to play Kill Team or Boarding Action missions.
This set is included in the Gothic Navy Spaceship : https://www.myminifactory.com/object/3d-print-gothic-navy-spaceship-a-boarding-action-terrain-292991
All models are presupported for SLA.
Also compatible with FDM printer.
There is 2 connection systems :
-with connector, compatible with plastic kit
-with magnet, diameter 3mm, 2mm height
The set is composed of :
- Beam
- Broken Beam
- Tanks
- Pipes
- Control Panel
- Power Panel
- Dynamo
- 2x Command Station
- Corner Command Station
- Holo-projector
- Door blocker
- Barricades
- Security Panel
- Camera
- Weapons Locker
- Bomb
- Weapon Robot
- Breacher Robot
- Escape Pod
- Stasis Tube
- Autopsy Table
- Surgery Chair
- Medical Trolley
- Medical Device
Tombship - 248 ROUND AND OVALE SCI-FI BASES 17 SIZES
248 round and ovale Sci-Fi bases in the Tombship style from the Gothic Sector : Lost Ships project. There is 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Lost Ships project : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
Round :
25mm : 44 models
28,5mm : 44 models
32mm : 37 models
40mm : 19 models
50mm : 19 models
60mm : 12 models
80mm : 7 models
90mm : 7 models
100mm : 3 models
130mm : 3 models
160mm : 2 models
Ovale
60x35mm : 19 models
75x42mm : 10 models
90x52mm : 7 models
105x70mm : 7 models
120x92mm : 4 models
170x105mm : 4 models
Gothic Navy Spaceship - 248 ROUND AND OVALE SCI-FI BASES 17 SIZES
248 round and ovale Sci-Fi bases in the Gohtic Navy Spaceship style from the Gothic Sector : Lost Ships project. There is 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Lost Ships project : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
Round :
25mm : 44 models
28,5mm : 44 models
32mm : 37 models
40mm : 19 models
50mm : 19 models
60mm : 12 models
80mm : 7 models
90mm : 7 models
100mm : 3 models
130mm : 3 models
160mm : 2 models
Ovale
60x35mm : 19 models
75x42mm : 10 models
90x52mm : 7 models
105x70mm : 7 models
120x92mm : 4 models
170x105mm : 4 models
Greater Good Spaceship - 248 ROUND AND OVALE SCI-FI BASES 17 SIZES
248 round and ovale Sci-Fi bases in the Greater Good Spaceship style from the Gothic Sector : Lost Ships project. There is 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Lost Ships project : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
Round :
25mm : 44 models
28,5mm : 44 models
32mm : 37 models
40mm : 19 models
50mm : 19 models
60mm : 12 models
80mm : 7 models
90mm : 7 models
100mm : 3 models
130mm : 3 models
160mm : 2 models
Ovale
60x35mm : 19 models
75x42mm : 10 models
90x52mm : 7 models
105x70mm : 7 models
120x92mm : 4 models
170x105mm : 4 models
Greater Good Spaceship- A boarding action terrain
Greater Good Spaceship is a complete set of STL files to print everything you need to build the interior of a Greater Good spaceship for boarding action or kill team game. It's a part of the Gothic Sector : Lost Ships project (available on MMF here), a collection of terrain for Kill Team and Boarding action.
Every part are designed to be printed with Resin or FDM printer.
It includes :
-5x Door models
-18x Wall models
-2x Broken wall models
-5x Pillar models
-4x Cap models
-26x Apparatus & Accessories models
It also includes additionnal features :
-Ground Tiles, with a version compatible with backlight
-Catwalk System
-Large Hangar door
-Windows
There is 2 connection systems :
-with connector, compatible with plastic kit
-with magnet, diameter 3mm, 2mm height
Gothic Navy Spaceship - A boarding action terrain
Gothic Navy Spaceship is a complete set of STL files to print everything you need to build the interior of a Gothic Human spaceship for boarding action or kill team game. It's a part of the Gothic Sector : Lost Ships project (available on MMF here), a collection of 4 spaceships for Kill Team and Boarding action.
Every part are designed to be printed with Resin or FDM printer.
It includes :
-5x Door models
-18x Wall models
-2x Broken wall models
-5x Pillar models
-4x Cap models
-26x Apparatus & Accessories models
It also includes additionnal features :
-Ground Tiles, with a version compatible with backlight
-Catwalk System
-Large Hangar door
-Windows
There is 2 connection systems :
-with connector, compatible with plastic kit
-with magnet, diameter 3mm, 2mm height
Tombship - A boarding action terrain
Tombship is a complete set of STL files to print everything you need to build the interior of a Tombship for boarding action or kill team game. It's a part of the Gothic Sector : Lost Ships project (available on MMF here), a collection of terrain for Kill Team and Boarding action.
Every part are designed to be printed with Resin or FDM printer.
It includes :
-5x Door models
-18x Wall models
-2x Broken wall models
-5x Pillar models
-4x Cap models
-20x Apparatus & Accessories models
It also includes additionnal features :
-Ground Tiles, with a version compatible with backlight
-Catwalk System
-Large Hangar door
-Windows
There is 2 connection systems :
-with connector, compatible with plastic kit
-with magnet, diameter 3mm, 2mm height
450 ROUND AND OVALE SCI-FI BASES 17 SIZES
450 round and ovale Sci-Fi bases from the Gothic Sector : Templaris project. 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Templaris project : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Round :
25mm : 80 models
28,5mm : 80 models
32mm : 61 models
40mm : 37 models
50mm : 37 models
60mm : 19 models
80mm : 12 models
90mm : 10 models
100mm : 7 models
130mm : 5 models
160mm : 3 models
Ovale
60x35mm : 37 models
75x42mm : 24 models
90x52mm : 19 models
105x70mm : 10 models
120x92mm : 7 models
170x105mm : 4 models
The complete project is available here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
A combo of my 4 projects, for personnal use only : Gothic Sector : Forge of Pavonis - Complete STL pack More details here https://www.myminifactory.com/campaigns/gothic-sector-forge-of-pavonis-2603 Gothic Sector : Lost Ships Part 1 - Complete STL pack More details here : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788 Gothic Sector : Lost Ships Part 2 - Complete STL pack More details here : https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-part-2-2248 Gothic Sector : Templaris - Complete STL pack All STL Files (1100+) + unlocked stretch goals. Personal use only. It includes : -Modular building system (Pillars, wall, floor tiles, etc....) -Sets of easy-to-build buildings -Modular terrain system (Ground tiles, ramps, wall and pillars) -Accessories (barrel, crate, street lamps, statues, etc...) -Bases (round, ovale and scenic)
106 backers
USD 150.00
Gothic Sector : Forge of Pavonis - Sample
A sample of the Gothic Sector : Forge of Pavonis Kickstarter Campaign. You can build destroyed buildings in a grimdark industrial style for your tabletop wargame scenery.
You can find the complete project on Kickstarter here :
https://www.kickstarter.com/projects/fabricatorslair/gothic-sector-forge-of-pavonis?ref=p8emm0
Assembling with connector or magnet (3x2mm and 5x2mm)
Compatible with FDM and Resin printer
Files are pre-supported for Resin printer.
Gothic Sector : Templaris - Terrain Accessories for Wargame
A complete set of accessories for your wargame terrain.
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-11 barrels (including damaged variations)
-4 Barricades (including damaged variations)
-3 Containers (including damaged variations)
-2 Crates wit damaged variation
-1 Pallet
-5 Stack of debris
-2 Statue undamaged
-4 parts of destroyed statues
-6 Street lamps (including damaged variations)
Compatibile with SLA and FDM printer
All parts are presupported for SLA printer.
Sci-Fi Scenic Base with curved walls
Scenic base with 9 curved walls and 5 ground style. Included in my two late pledge campaign :
https://www.myminifactory.com/campaigns/gothic-sector-lost-ships-1788
https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Every ground style is supplied with 40mm/32mm/28m/25mm bases.
Each part are pre-supported
Gothic Sector : Templaris - Objective Markers for Wargame
A set of 6 objective markers for wargame.
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Compatible with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Sector : Templaris - Modular Terrain System
A complete modular terrain system that allow you to build terrain with ramps and height
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-4 styles of ground tiles (40 tiles for each style)
-20 Road tiles, with intersection and turn
-5 Ramps
-Pillars and walls to do height
There are 2 Assembly systems : with connector (pegs included) or with magnet
Compatibility with SLA and FDM printer
All parts are presupported for SLA printer.
Gothic Sector : Templaris - Modular Building System
A complete modular building system that allow you to build small ruins to big buildings like cathedral (and bigger)
It's a part of the Gothic Sector : Templaris project you can find here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
It includes :
-Pillars and destroyed pillars
-Wall, damaged and destroyed walls
-Floor tiles, Damaged and destroyed floor tiles
-Archs
-Building accesories like lamp or ornament
There are 2 Assembly systems ; with connector (pegs included) or with magnet (Magnet needed : 3mm diameter and 2mm thickness for wall/pillar/floor tiles and 5x2mm between pillars)
Compatibility with SLA and FDM printer
All parts are presupported for SLA printer and some parts are supplied with kind of support for FDM printer.
450 ROUND AND OVALE SCI-FI BASES 17 SIZES
450 round and ovale Sci-Fi bases from the Gothic Sector : Templaris project. 17 sizes.
All models are presupported for SLA.
Also compatible with FDM printer.
This pack is included in the full Gothic Sector : Templaris project : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Round :
25mm : 80 models
28,5mm : 80 models
32mm : 61 models
40mm : 37 models
50mm : 37 models
60mm : 19 models
80mm : 12 models
90mm : 10 models
100mm : 7 models
130mm : 5 models
160mm : 3 models
Ovale
60x35mm : 37 models
75x42mm : 24 models
90x52mm : 19 models
105x70mm : 10 models
120x92mm : 7 models
170x105mm : 4 models
The complete project is available here : https://www.myminifactory.com/campaigns/gothic-sector-templaris-1431
Gothic Ruins Set #1 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There is 14 parts that allow you to build
-1x two story building
-3x one story building
-8x ruins
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : I recommend to print directly on the build plate (hollow version), but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Gothic Ruins Set #3 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There are 22 parts that allow you to build
-a big church composed of 4 parts (Front West/Front East/Rear West/Rear East)
-4x one story building (made from the 4 parts of the Cathedral, using the alternative Level1)
-6x ruins (When using the levels 1 alone)
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : You can print directly on the build plate (hollow version) if you have correctly calibrated the Bottom Tolerance, but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
Gothic Sector : Templaris - Kit for Merchant Tier
Some kit for Merchant Tier (Chitubox project and 3D render)
Gothic Ruins Set #2 - Print-in-place
An amazing set of gothic ruins from the Gothic Sector Templaris project (full project available here). There is 23 parts that allow you to build
-1x two story building
-2x one story building
-2x two story tower
-2x one story tower
-2x destroyed bridge
-1x ruin
Every parts can be printed on FDM printer and SLA printer (IMPORTANT NOTE : for SLA printer, you will need at least a medium size printer (9inch screen))
For FDM printer : no support needed, it's print-in-place
For SLA printer : You can print directly on the build plate (hollow version) if you have correctly calibrated the Bottom Tolerance, but I also provide supported version.
The floor texture shall be glued on top of the walls but gluying different floor of a building is optionnal.
All STL Files (1100+) + unlocked stretch goals. You can sell your print of the Gothic Sector Templaris project only (not the STL files) It includes : -Modular building system (Pillars, wall, floor tiles, etc....) -Sets of easy-to-build buildings -Modular terrain system (Ground tiles, ramps, wall and pillars) -Accessories (barrel, crate, street lamps, statues, etc...) -Bases (round,ovale and scenic) Commercial license details available here (in the "Commercial licence details" section) : https://www.kickstarter.com/projects/fabricatorslair/gothic-sector-forge-of-pavonis?ref=user_menu