3.85" Tire Insert (1.55" wheel)
3.85" Tire Insert (1.55" wheel)
3D
Published 2021-09-06T10:14:19+00:00
All my tire insert models in Myminifactory are outdated and do not perform great. I've moved all my new inserts to Cults3D, providing new top performance designs available for every wheel and tire size combinaciones. Please visit: https://cults3d.com/en/users/D440RC/creations
This is a tire insert to replace RC wheel foams for 1.55" wheels. The size of this insert was designed to fit 3.85" Tall by 1.45" Wide Tires, like Super Swamper 1.55".
Testing video: https://youtu.be/YEpkF-8swfI
Ideal if you want more support for your RC and keep the shape of the tire while allowing the insert to flex following the terrain/rock shape for better grip.
The insert has three stages, first is solid (or depends on the infill you chose), the second it has spacers that make it rigid but will flex on a big jump or crash, and the third has many pins holding the outer skin, making it smooth and soft to adapt to the shape of the terrain/rock. The outer layer (or skin) also has angled edges to provide more support on sidehill crawling.
I print these in TPU 95A with 10% infill and 0.6m nozzle. If your rig is really lightweight or you want something softer, you can print in TPU 90A. The insert is designed to keep the shape of the wheel in full flex or sidehills, so too soft TPU could affect the performance in this situation.
TPU 90 or 95A, with 10% infill and a 0.6m nozzle for speed. Takes about 4 hours to print.
| Date published | 06/09/2021 |
| Supporto Gratuito | YES |
