Adorable Flexi Firefly Articulated Design STL/3MF MultiColor Pre Painted
$3.00 Adorable Flexi Firefly Articulated Design STL/3MF MultiColor Pre Painted
Published 2024-04-22T16:38:48+00:00
the Adorable Flexi Firefly! It's a print-in-place design that doesn't need any supports! The tail and wings are snap to fit with the Body.
Just like always, I've included pre-painted 3MF files for easy printing, and yep, there's also a stacked version for batch printing. Oh, and I threw in some pre-brims on the legs and tail to help them stick better to the bed. Remember to snip those off after printing!
By the way, for the glow tail, it's best to print it separately to save time during multicolor printing. And don't forget, it's not a good idea to run luminous filaments through the AMS unit - they can be a bit rough and might mess up the feeding funnel. So, print the glow part directly from the printer's back inlet.
And hey, if you notice the wings feeling a bit loose or tight, you can tweak them by adjusting the scale by about +-1%.
Support-free design
Layer height: 0.18mm to 0.22mm
Wall count: 2
Bottom layers: 4
Top layers: 5
Infill: 12% (Gyroid)
Downscaling: Not Recommended!
Magnet Size is 6x3mm
Date published | 22/04/2024 |
Price | $3.00 |
Tecnologia | FDM |
Supporto Gratuito | YES |