AECAPC02 - Butcher Shoppe
$8.00 AECAPC02 - Butcher Shoppe
3D
Published 2023-01-04T09:53:59+00:00
This set is included in our Welcome pack, for Tribers pledging $15 and up.
This set, Butcher Shop, was something we wanted to do for a long time. Our patrons voted for more capitol city terrain, and this set needed to get made in advance of upgrades to the Shambles set.
This set was sculpted mostly by Nasos Maloudis, with help from Jeromy K. Smith and Will Walker. We tried to reflect the variety of options one might find in a butcher shop without being too upsetting to modern sensibilities. We hope our attempt at sensibility meets your expectations of excellence.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 04/01/2023 |
| Price | $8.00 |
| Supporto Gratuito | YES |