Artemis/Spa PP700S-A silencer/moderator
4,172
views
136
downloads
0 comments
Loading comments...
Artemis/Spa PP700S-A silencer/moderator
3D
Published 2020-07-29T12:37:38+00:00
2
0
Add to Collection
Description
This is a silencer for the Artemis PP700S-A PCP pistol.
CAUTION: If you're experiencing pellet deviation, try the STL with an 8mm hole, and printing at 0.2mm
Unsilenced: ~105dB
Walther moderator: ~98dB
SHH!oot moderator: ~95dB
See more details and a demonstration here:
https://youtu.be/4qE5w6iFxqo
Licenza
Printing Details
Using Cura, print with support set to "touching bed" ONLY.
You may want to print the dust cover a bit smaller, as it might be a bit loose.
The photos are of my one printed at 0.3 layer height, at 90mm/s on the Sidewinder X1.
NOTE: I reprinted the 8mm one at 0.2 at 45mm/s, to much more success, accuracy-wise
Technical Information
Date published | 29/07/2020 |
Tempo per farlo | 5 - 10 Minuti |
More Information
Object Parts