Beetle Risk of Rain 2 Fan Art
Beetle Risk of Rain 2 Fan Art
Published 2022-01-01T11:36:34+00:00
Highly territorial and aggressive pack creatures, Beetles are aliens native to the planet featured in the Risk of Rain game franchise. Easily one of my all-time favorite games. They burrow up from underground and can overwhelm you with sheer numbers if you're not careful!
Modeled for 28mm, ideal for size medium tabletop RPG creatures.
Not very detailed, made for desktop FDM printing. This one is pretty dainty and difficult, you may need to experiment for best results. Try printing at weird angles or new support types, like upside-down, or with trees, for example.
For me, I printed him upright with thick supports only 0.24mm away from his model, all with a fat brim. Details below.
Printer: Creality Ender 3
Material: PLA
Rafts: Yes
Supports: Yes, 50° Touching Buildplate w/ towers
Layer Height: 0.12mm
Infill: 50% Gyroid
Slicer: PrusaSlicer 2.3.3
Nozzle: 0.4mm
Speed: 10mm/s
Wall Line Count: 3
Top Layers: 7
Bottom Layers: 7
Ext. Temp: 195°C
Bed Temp: 60°C
Retraction Distance: 7 mm
Retraction Speed: 50mm/s
Software Used: Blender 2.9
Having Some Issues?
A well-calibrated printer is key to really nice print quality. Try the following by looking up some tutorials:
- Calibrate E-Steps
- Calibrate X, Y, Z Motor Steps
- Calibrate Flow Rate (aka "Extrusion Multiplier")
- Re-level Build Plate
- Dial in filament temperature
- Toast filament with a dehydrator
- Slow down print speed
Date published | 01/01/2022 |
Tempo per farlo | 60 - 240 Minuti |
Quantità di filamento | 6 grams |
Dimensioni | 22.1mm x 30.2mm x 22.7mm |