Cassette Lamp
Cassette Lamp
Published 2020-04-01T12:22:22+00:00
Use a 1 meter LED-strip and wrap it around the holder in the middle.
A rubber band helps to put all cassettes in the right position.
I glued the lid on the body.
I recommend wrapping the cable around the hole in the middle to fix it to the lamp, so the stripe doesn't get lose if some pulls at the wire.
I used this LED-stripe from Amazon since it is dimmable. https://www.amazon.de/Onforu-Lichtband-Selbstklebend-Innenbeleuchtung-Weihnachten/dp/B07S92CJJ4/ref=sr_1_34?__mk_de_DE=ÅMÅŽÕÑ&keywords=led+strip&qid=1585743341&s=lighting&sr=1-34
Edit:
added files for smaller printers: Hex base highd 3 or 4 cassettes and Pentabase 3 or 4 cassettes
Use 4 perimeters for the tiny rails on the outside.
Recomment using PET-G or ABS since LED can heat up a little.
The tower in the middle doesnt need much infill, i used 10.
Date published | 01/04/2020 |
Awesome!! Thanks :)