Celtic Dice Tower
$9.90 Celtic Dice Tower
3D
Published 2021-06-04T12:44:56+00:00
A Gateway to Druidic Mysteries and Celtic Enchantment
Embark on a mystical journey through the annals of druidic practices with the Celtic Dice Tower. This 3D-printable model, comprised of three STL files requiring assembly, transcends the mundane confines of a mere dice tower; it's a sanctified artifact of ancient druidic rituals, graced with the sacred Triquetra interlaced within a circle. But beware, adventurers! The engraving at the base isn't just for show. Fail to fill it with UV resin, and your dice may tumble into the crease, refusing to reveal their arcane secrets.
Perfect for Wargames, D&D, Pathfinder, and a plethora of otherworldly TTRPGs.
Born from our Celtic Dice Tower Kickstarter campaign
Includes:
- Top Tower STL file
- Base Tower STL file
- Stair Piece STL file
Dice not included
The files are optimized for FDM PLA Printing.
Usage Policy
These files are for non-commercial, personal use only.
Attribution-NonCommercial-NoDerivatives 4.0 International (Creative Commons BY-NC-ND 4.0)
For the ones enchanted enough to want more, consider supporting Stratation Design on Patreon and find our Merchant Usage Membership.
To see my other projects and support my work: Kickstarter projects
Or visit us on our website at StratationDesign.Com
FDM OPTIMIZED MODEL: NO SUPPORT NEEDED.
The printing tests were carried out on a Creality Ender 3 3D printer.
Time to print (Total 3 pieces): Min 30h, Max 60h.
(Approx. 30h for a print speed of 60mm/sec, infill 10%, 0.2mm layer height, time may vary depending on 3D printer)
Dimensions (assembled):
211.36mm x 218.43mm x 275.41mm
Material quantity (Total 3 pieces): Approx. 400g PLA
| Date published | 04/06/2021 |
| Price | $9.90 |
| Tempo per farlo | 1800 - 3600 Minuti |
| Quantità di filamento | 400g |
| Dimensioni | 211.36mm x 218.43mm x 275.41mm |
| Tecnologia | FDM |
| Supporto Gratuito | YES |
Unfortunately my nozzle was a bit "damaged" from scratching over the bed :/ but still impressive design and turns out good printed on RatRig Vcore3 400 PLA is from RedLine Matte StoneGrey Layerheight: 0.15mm Nozzle: 0.4mm