Cube Spinner with Ball-Vertices
Cube Spinner with Ball-Vertices
Published 2017-06-30T11:58:01+00:00
- my take on the cube spinner design
- I thought they miss a lot of inertia when only made of plastic, so I added steel balls to all 8 corners
- It got a nice weight to it now!
- 13 mm steel balls are used, and one standard 608 bearing
- you need 2x "Mainbody_half" and 2x "Cap"
- mainbody needs to be glued together after inserting the bearing
- caps need to be glued together
- balls should snap in place
- my printed version was not perfect, as you can see on the pictures, but I changed some things in the files to enhance printability for you
- model units are [mm]
- added "_simple" models without the recess on the cubes sides, if you like the clean look
- added "_inch" models with pockets for 1/2" (12,7mm) steel balls
- 0.15 print resolution
- supports needed
- printed in DasFilament bronze PLA
- had to try some different support settings to get it to work
Date published | 30/06/2017 |
Tempo per farlo | - 180 Minuti |
Tecnologia | FDM |
Complessità | Medium |